ork Archives - Page 4 of 93 - Felix's Gaming Pages

Shading the Heavy Bolter Cupola

There are Orks who have looted Imperial weaponry. Not only can they use Space Marine weapons they can also borrow the transport. I wrote about my Ork Looted Rhino and where I was in progressing it and then added the tracks.

When I was constructing the Ork Battlewagon I decided against using the included turret. So I decided to have a go at seeing how it and some smaller turrets looked on my Ork Looted Rhino. Having painted the turrets, I gave the Heavy Bolter Cupola a wash of Agrax Earthshade.

This wasn’t quite the effect I wanted, in order to match the existing Rhino body. Close, but not close enough.

Forgeworld Ork Aircraft Traktor

The Ork Aircraft Traktor is used to taxi Ork aircraft in position to launch, where it takes off discarding the launch trolley. the Aircraft Traktor also recovers landed Ork aircraft for refueling.

One of the gifts I got for a birthday many years ago was the Forgeworld Ork Aircraft Traktor and Launch Trolley.

The model consists of the plastic Wartrakk and some resin pieces for the fuel bowser, a resin launch trolley and a towing bar. I have nearly finished painting it, so decided it was time I did finish painting it.

Having touched up the fuel tank with some white paint I then used Snakebite Leather Contrast paint to paint the leather seat and the fuel tank.

I used Blood Angels Red on the other part of the motorbike.

I also started looking at the launch trolley and thinking about finishing up the tyres.

Painting the Looted Rhino Turrets

There are Orks who have looted Imperial weaponry. Not only can they use Space Marine weapons they can also borrow the transport.

A Looted Rhino is an Imperial Rhino armoured personnel carrier that has been looted from a previous battlefield by Ork Lootas and is now used as a transport for their WAAAGH!

I wrote about my Ork Looted Rhino and where I was in progressing it and then added the tracks.

When I was constructing the Ork Battlewagon I decided against using the included turret. So I decided to have a go at seeing how it and some smaller turrets looked on my Ork Looted Rhino.

Having given the turrets a white undercoat back when I started the model I then gave them a base coat of Snakebite Leather.

I suspect the white part of the turret was where I was holding it while painting it. So this is where I was at with them when I looked at finishing the Ork Looted Rhino.

Here is the smaller front turret.

Here is the Heavy Bolter cupola.

For some arcane reason (probably lack of time and motivation) I put the turrets away for a few years…

Getting them out again recently I decided to finish them off. The first challenge was that Snakebite Leather is no longer available. However using a paint compatibility chart, I completed the turrets using Balor Brown.

However it wasn’t an exact match, so I repainted the whole turret using Balor Brown.

I did the same for the smaller turret and the cupola.

For the smaller turret I painted the main weapon with Leadbelcher.

Now I had to work out how to make these newly painted turrets look like the same as the Looted Rhino bodywork even though they were painted years apart. My own guide was not as useful as I hoped as the paints, inks and washes I used back then are no longer available.

Hmmm…

Oh I also found a Flamer cupola as well.

However the metal component makes this unbalanced, so would need to be glued in, rather than being removable.

I started my Ork Looted Rhino many years ago, and the process I used is outlined on my workbench feature on the Looted Rhino.

Turrets for the Ork Looted Rhino

There are Orks who have looted Imperial weaponry. Not only can they use Space Marine weapons they can also borrow the transport.

A Looted Rhino is an Imperial Rhino armoured personnel carrier that has been looted from a previous battlefield by Ork Lootas and is now used as a transport for their WAAAGH!

I wrote about my Ork Looted Rhino and where I was in progressing it and then added the tracks.

When I was constructing the Ork Battlewagon I decided against using the included turret. This is how the Battlewagon looks with the included turret, though I decided not to use it with the Battlewagon, made it a little too tall for my liking.

So I decided to have a go at seeing how it looked on my Ork Looted Rhino. There was an Imperial Predator turret ring in the Rhino kit and this nicely fitted the Ork Battlewagon turret, as well as fitting the Rhino hatch area.

Very much like an Imperial Predator.

The Battlewagon had additional smaller turrets, so I decided to try them out as well and see how they looked.

I gave all the turrets a white undercoat.

Here is the smaller turret.

Here is a cupola with a Heavy Bolter.

Here is the larger undercoated turret.

I started my Ork Looted Rhino many years ago, and the process I used is outlined on my workbench feature on the Looted Rhino.

Ork Warboss

This Ork Warboss was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”.

There are very few parts and the clip nature of the kit means it went together very easily.

The original plan was an undercoat, and I was pretty sure I would go with my traditional black for Orks.

Having constructed the model I then put it away for a while.

Now having got it out again, I am thinking that I may go with a white undercoat and then use contrast paints for the model.

Plastic Ork Deffkoptaz

Within the Warhammer 40K 5th edition boxed set are three very nice Ork Deffkoptaz.

They don’t look like they should be able to fly, but remember these are Orkish, if Orks believe that they will fly, then they will fly!

Thinking about how to paint these. Not sure if I should go with a black undercoat or a white undercoat. Thinking that possibly a white undercoat and then use contrast paints for the main part of the model.

Ork Trukk with Enclosed Cab

Designed by Will Hayes and Phil Stutcinskas. (a hybrid resin and plastic model using the Ork Trukk kit). —The model makes for a great alternative for your Trukk fleet as well as an excellent base for your own conversions. Its enclosed cab can also be used to represent the Armour Plates upgrade on a trukk.

This Trukk model also includes a folding platform at the rear. This in my opinion is much better than the plastic platform included with the plastic kit.

I made my with the sides fixed in the upright position.

The chassis was constructed as per the instructions, though like my other Trukk as I had spare wheels I gave the model all rounded wheels rather than the mix that comes as standard with the kit.

The next step will be a white undercoat.

Going back to the Ork Halftrakk

January 2008 saw the release of the new Ork Trukk. I had expected to see some Forge World conversion kits relatively quickly, however though we saw the Flakk Wagon at GamesDay 2008, it wasn’t until July 2009 that we saw the first actual Forge World variant Ork Trukk kit, the Ork Half Trakk.

This has a considerable amount of resin for the tracks, new front wheels and a new engine.

I had very little warpage with this model, but I did have a shrinkage probem with the tracks, which I fixed with plastic rod.

The chassis was then given a black undercoat using spray paint. I then drybrushed the whole chassis with Tin Bitz. The flatbed was sprayed with a Humbrol brown paint. I then gave it a wash of Devlan Mud. I added some more washes to the body of the Half Trakk using Devlan Brown and Badab Black.

The engine needs work and the whole thing also needs more weathering.

Then there is the main weapon and the krew.

Ork Halftrakk on the workbench.

Revisiting Another Ork Trukk

Trukks are designed to transport mobs of choppa-wielding Boyz into combat as quickly as possible. The original Ork Trukk model was designed for Gorkamorka, and then became part of Warhammer 40K with Codex Orks. It was really way too small and needed to be updated, and updated it was back in January 2008 with the release of the new Ork Trukk.

I revisited another of my Ork Trukks in an earlier blog post.

The model was constructed as per the instructions, Generally I try and build as much of the model as possible to avoid having to glue painted parts together.

The chassis and wheels were the first parts I stuck together. As I had got the Forge World Ork Halftrakk I had some spare wheels, so rather than use the mix that is provided, I doubled up the wheels using the “squarer” wheels. This should give my Trukks a more diverse look.

The chassis was painted black and the flatbed was given a brown spray.

I am keeping the back of this truck quite clear of boarding ramps and armour as it will be a mobile weapons platform.

See how I made the Trukk.

Revisiting the Ork Trukk

The model was constructed as per the instructions, Generally I try and build as much of the model as possible to avoid having to glue painted parts together.

The chassis was painted black and the flatbed was given a green spray.