workbench – Page 20 – Felix's Gaming Pages

Tracking the Deimos Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems.

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I painted the main weapon, and the exhausts, with Leadbelcher. It was then onto shading the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did some more drybrushing some lighter yellow paints.

The next stage was to affix the tracks to the Predator.

With the tracks for the Predator I gave them a spray of Mechanicus Standard Grey, this was followed by a heavy drybrush of Gorthor Brown. The tracks, once dry, had a wash of Agrax Earthshade Shade. After painting and shading them, I drybrushed them lightly, first with Leadbelcher. I then did a very light drybrush with Terminatus Stone.

The tracks were removed from the sprue and using superglue they were attached to the Predator.

You have to be careful when attaching these, as they are specific to each side of the Predator, but they do attach to the Predator quite easily.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Painting the barricades

I had been thinking about getting the Mekyboy Workshop kit for a while. So on a shopping trip to my local games shop I decided to make an impulse purchase and buy the box. Well it was nearly 30% cheaper than on the GW site.

Having cleaned the plastic parts I gave them a Corax White undercoat. I then started painting the basecoat across the scrap piles and barricades using a combination of Base and Contrast Citadel paints. I continued to paint the different barricades, using, as before, Base and Contrast paints.

I used some Citadel Cygor Brown Contrast paint on the barricades.

I think it may have been a little too dark for the effect I was trying to achieve.

I think I might do some drybrushing with Gorthor Brown to brighten it up a bit.

More on the various parts from the boxed set.

Tracking the Deimos Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here. I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I also painted the bolter and exhausts with Leadbelcher. I then shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did some more drybrushing.

The next stage was to affix the tracks to the Rhino.

With the tracks for the Rhino I gave them a spray of Mechanicus Standard Grey, this was followed by a heavy drybrush of Gorthor Brown. The tracks, once dry, had a wash of Agrax Earthshade Shade. After painting and shading them, I drybrushed them lightly, first with Leadbelcher. I then did a very light drybrush with Terminatus Stone.

The tracks were removed from the sprue and using superglue they were attached to the Rhino.

You have to be careful when attaching these, as they are specific to each side of the Rhino, but they do attach to the Rhino quite easily.

See the workbench feature on the Deimos Pattern Rhino II.

Shading the scrap some more

I then did some additional shading using Citadel Nuln Oil Shade.

See the workbench feature on Pile of Scrap 3.

Shading the Typhon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

The Typhon Heavy Siege Tank was released as a plastic kit for The Horus Heresy. I’ve always liked the Forge World resin model and so was pleased to get one of the new plastic kits for my Imperial Fists force.

Having started constructing the model, I finished putting it together. The next stage was a white undercoat. I then gave the model a partial base coat of Army Painter Desert Yellow. I then gave the model a base coat of Army Painter Daemonic Yellow. I painted the bolter and the exhausts using Citadel Leadbelcher.

It was then onto shading the model. I used some Citadel Reikland Fleshshade Shade, aiming to achieve the same result I got with my first Deimos Pattern Rhino.

This time though, compared to some of my other models I went with an initial lighter shade, with the intention to add more later.

I gave the main weapon a wash of Agrax Earthshade Shade.

I also shaded the gun shield with Citadel Reikland Fleshshade Shade.

The next step will be some more shading.

See the workbench feature on the Typhon Heavy Siege Tank.

Shading the scrap

I had been thinking about getting this kit for a while. So on a shopping trip to my local games shop I decided to make an impulse purchase and buy the box. Well it was nearly 30% cheaper than on the GW site.

Having finished the base coat on pile of scrap 3, I gave it a wash using Citadel Agrax Earthshade Shade.

See the workbench feature on Pile of Scrap 3.

Typhon Sponson Weapons

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

Having constructed the sponson weapons I gave them an undercoat of white spray paint.

I was intending to give the sponson weapons a base coat of Citadel Leadbelcher but my spray had run out when I had base coated the main weapon.

However I did give the shields of the weapons a spray of Army Painter Daemonic Yellow.

I will then use a pot of Citadel Leadbelcher to paint the weapons.

See the workbench feature on the Typhon Heavy Siege Tank.

Detailing the Typhon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

The next step was to paint the bolter and the exhausts using Citadel Leadbelcher.

The next step will be shading the model.

Unlike some of my other models there is no iconography on the Typhon, so this stage was quicker than some of my Grey Knights models.

See the workbench feature on the Typhon Heavy Siege Tank.

Painting the Typhon Yellow

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

Having started constructing the model, I finished putting it together. The next stage was a white undercoat. I then gave the model a partial base coat of Army Painter Desert Yellow.

I then gave the model a base coat of Army Painter Daemonic Yellow.

I also gave the main weapon shield the same basecoat of Army Painter Daemonic Yellow.

This is the Typhon with the dreadnought siege weapon.

See the workbench feature on the Typhon Heavy Siege Tank.

Underneath the Typhon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

Having started constructing the model, I finished putting it together. The next stage was a white undercoat.

I had planned to base coat the underneath of the model with with Citadel Zandri Dust in preparation for painting the the whole model yellow. However when visiting my FLGS, they had sold out of Zandri Dust spray. So I bought some Army Painter Desert Yellow Spray, along with can of Army Painter Daemonic Yellow.

I sprayed the model first with Desert Yellow spray.