iconography Archives - Felix's Gaming Pages

Land Raider Doors Stone Iconography

Grey Knights can use Land Raiders, when I first started putting this force together I knew that if I was going to get a Land Raider it would have to be the Forge World MkIIB Land Raider.

However I was also lucky enough to receive a second Land Raider as a present. It was the Terminus model, I decided though to build it as a standard Land Raider. Having made the hull I kept the weapons as separate assemblies, I would also be adding the tracks later too.

Now I made a mistake when I ordered my Mark IIb Land Raider, you get a set of doors and I (foolishly) asked them to replace the supplied eagle doors with Grey Knights Land Raider doors.

Now what I didn’t realise was that the side doors on the sponson are not the same size as the Land Raider doors, but are in fact the same size as Rhino side doors. So the Grey Knight doors are too big! However this meant I could use them on this new Land Raider.

The Land Raider has been through a journey of black undercoat, Tausept Ochre, some airbrushing and eventually a final coat of Daemonic Yellow spray from Army Painter.

When I was originally looking at the iconography on the doors of my Land Raider I did think about how I should paint it.

Initially I did consider painting it up with the colours of red, gold, black and white skulls. However when I looked at examples online they looked very busy. One thing I always liked about the Terminators from Space Hulk and at Warhammer World were the stone icons on their shoulder pads, like these Dark Angles Death Wing Terminators from Warhammer World.

So in the end I decided that I would paint the icongraphy on the doors as stone. I painted the door iconography with Mechanicus Standard Grey. I however did paint the skulls with Ushabti Bone.

Then I washed the model with various Citadel Shades. I also did some dry brushing with various shades of yellow.

Once the model was shaded I then painted the doors with Stormvermin Fur. This was followed by a drybrush of Dawnstone Layer and then a lighter dry brush of Administratum Grey. The Dry paint grey was too dark, so I did a final really light dry brush of Terminatus Stone Dry paint.

I was really quite pleased with the effect that I got in the end.

See the full workbench feature on this Land Raider.

Drybrushing the Land Raider

I have on my workbench a standard Land Raider.

The standard Land Raider, also known as the Land Raider Phobos, is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” It is one of the most resilient and iconic armoured vehicles in the galaxy. The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. Protected by bonded Ceramite and Adamantium armour, the Land Raider is nearly impervious to all save the most destructive weaponry.

For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I painted the weapon sub-assemblies. added detailing and painted the iconography. Then using various Citadel shades I washed and shaded the model.

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a stippling process added paint to the model.

This was done all across the model and then repeated. I wanted to remove some of the shine from the shade as well.

I then gave the model a light drybrush of Citadel Layer Dorn Yellow. The aim here was to add edge highlights to the Land Raider.

I wanted to achieve a slight dusty effect as well.

After the drybrushing I will then detail the iconography, the weapons, and the engines on the model.

The tracks for the Land Raider were given a spray of Mechanicus Standard Grey.

I then did a heavy drybrush of Gorthor Brown. The tracks, once dry, I then gave them a wash of Agrax Earthshade Shade. After painting and shading them, I drybrushed them lightly, first with Leadbelcher. I then did a very light drybrush with Terminatus Stone.

The next step was to paint and highlight the iconography.

This is to brighten up the purity seals and other iconography after it was dulled down by the shades and washes.

I am really pleased with how this Land Raider has turned out, so much so I have decided that I will paint my Mark IIb Land Raider using the same process and techniques. However I might give the model a white spray first before doing the yellow.

See the workbench feature on the Land Raider.

Shading the Land Raider

I have on my workbench a standard Land Raider. For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I painted the weapon sub-assemblies. added detailing and painted the iconography.

I attached the lascannons to the Land Raider and then started to shade the model. The side sponsons I did glue in. The frontal lascannons I left unstuck as I wanted to ensure I could get behind them.