Category: workbench

Fixing the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece. Well I was pleased to find the missing parts and these have now been reunited with the Land Raider. They were a set of twin bolters and a armoured shell for the bolters.

At the point though of repainting I didn’t glue in the armoured shell, as I knew I would need to paint the bolters first before affixing the shell.

The model was given a white undercoat and then a new basecoat of Daemonic Yellow spray from Army Painter.

I then painted the twin bolters with Leadbelcher.

When it came to fixing the shell in, I had a bit of trouble fitting it into place. It was a bit of a tight fit.

So much so trying to fit the piece I damaged the paintwork on the armoured shell.

I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

Reflecting on the Rukkatrukk Squigbuggy

On one of my recent posts I got a comment from Katie (@Lawgirl04) about another of my  workbench models, the Ork Rukkatrukk Squigbuggy.

Sorry to comment here — but I found your Rukkatrukk Squigbuggy posts, and I’m dying to know if you finished it? Also, I appreciate your tip on how you painted the buggy without gluing down the roll bar. I am just starting this project (and I’m VERY new to warhammer), and it’s nearly impossible to find tips/tricks for painting this squigbuggy. If you post more on this item, any tips are appreciated!! Thanks for the great content!

As the comment wasn’t relevant to the model in the blog post, I thought I would post the comment in the blog in a new posting.

I did look over the workbench feature of the Rukkatrukk Squigbuggy to see how far I got with the model.

Well not very far at all to be honest.

Not sure what I would do next. I think I will use some Contrast paint on the main chassis, and then use different colours for the bodywork. I will also be using Leadbelcher as the primary colour on the metallic areas, such as the buzzsaw.

Toning down the purity seals

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I recently retrieved it from storage and decided that I would try and finish painting it. I was using Tausept Ochre as the base coat, however having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would paint the Razorback in the same scheme. Having sprayed the underneath of the model with Citadel Zandri Dust. I gave the model a basecoat of Army Painter Daemonic Yellow. This was followed with Leadbelcher for painting the exhausts and weaponry. The next step was painting the iconography and purity seals. I then slightly messed up the shading on the model, but think I managed to get the effect I was looking for. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. The next step was to paint and highlight the iconography. I then glued the tracks to the Razorback using superglue.

I also took the time to brighten up the purity seals and other iconography after it was dulled down by the shades and washes. I also highlighted the purity seals with some White Scar paint.

However, as with my Repressor, I think I overdid this, they are too bright for the model. I decided to dull these down a bit with some Citadel Seraphim Sepia Shade.

I think that this works better than bright white purity seals.

See the workbench feature on the Razorback.

Detailing the Deimos Pattern Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here.  I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow.

I  painted the cupola bolter, and the exhausts, with Leadbelcher.

Deimos Pattern Rhino

This Rhino has a single cupola bolter, with my first Deimos Pattern Rhino I gave it two cupola bolters. The rear view of the Rhino.

Deimos Pattern Rhino

I did a heavy drybrush of the tracks with Gorthor Brown, having initially given them a basecoat of a spray of Mechanicus Standard Grey.

See the workbench feature on the Deimos Pattern Rhino II.

Detailing the Deimos Pattern Predator Battle Tank

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems. 

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow.

I  painted the main weapon, and the exhausts, with Leadbelcher.

Deimos Pattern Predator Battle Tank

I had already painted the sponson weapons with Leadbelcher.

Deimos Pattern Predator Battle Tank

I had a few problems with the turret not fitting the turret hole, so I did some light filing of the edges of the turret and the hole for a better fit.

Deimos Pattern Predator Battle Tank

I did a heavy drybrush of the tracks with Gorthor Brown, having initially given them a basecoat of a spray of Mechanicus Standard Grey.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Those purity seals are too white!

The Repressor tank is often used by Sisters of Battle as transport, and by the Adeptus Arbites in an anti insurgency role. I started building and painting this model back in 2007, I recently retrieved it from storage and decided that I would try and finish painting it. I realised I had made quite significant progress and it wouldn’t take too long to finish it off.

Having sprayed the model with Citadel Zandri Dust over the existing Tausept Ochre base coat and black undercoat, I started the detailing, using Leadbelcher on the weapons and the exhausts. The next step was painting the iconography and purity seals. I then gave the model a wash using Citadel shades. I then did some additional shading using different shades. The next stage was some drybrushing, for this I used Citadel Zandri Dust. I fixed the tracks to the model.

I also took the time to brighten up the purity seals and other iconography after it was dulled down by the shades and washes. I also highlighted the purity seals with some White Scar paint.

However, I think I overdid this, they are too bright for the model. I decided to dull these down a bit with some Citadel Seraphim Sepia Shade.

I was pleased with this, giving the purity seals an older worn look to them.

See the workbench feature on the Inquisitorial Stormtroopers Repressor Transport.
.

Also painting it yellow

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems. 

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar.

As with my first Deimos Pattern Rhino I am painting it yellow. I had intended to spray the underneath of the model with Citadel Zandri Dust in preparation for painting the the whole model yellow. However I ran out of paint…

So this model was just given a coat of yellow paint. Games Workshop don’t do a yellow spray and I don’t have an airbrush. I did use a paint comparison site to find a close alternative to Yriel Yellow. The Daemonic Yellow spray from Army Painter seemed like a good choice, and my local FLGS had one in stock, which I bought in the summer.

I gave the model a couple of light coats of Daemonic Yellow.

The sponsons I kept seperate and sprayed them with Citadel Leadbelcher.

I did the same for the Deimos Pattern Rhino and then that can of paint gave up the ghost.  Luckily there was enough to paint the Predator and the Rhino.

For the tracks, still on the sprue, I gave them a spray of Citadel Mechanicus Standard Grey.

The next stage will doing the detailing, the exhausts and the weapons.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Painting it yellow

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here.  I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar.

As with my first Deimos-pattern Rhino I am painting it yellow.

I had intended to spray the underneath of the model with Citadel Zandri Dust in preparation for painting the the whole model yellow. However I ran out of paint…

So this model was just given a coat of yellow paint. Games Workshop don’t do a yellow spray and I don’t have an airbrush. I did use a paint comparison site to find a close alternative to Yriel Yellow. The Daemonic Yellow spray from Army Painter seemed like a good choice, and my local FLGS had one in stock, which I bought in the summer.

I gave the model a couple of light coats of Daemonic Yellow.

I did the same for the Deimos Pattern Predator and then that can of paint gave up the ghost.  Luckily there was enough to paint the Rhino.

For the tracks, still on the sprue, I gave them a spray of Citadel Mechanicus Standard Grey.

The next stage will doing the detailing, the exhausts and the hatch bolter.

See the workbench feature on the Deimos Pattern Rhino II.

 

Undercoating another Plastic Deimos Pattern Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here.  I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately.

I gave the model an undercoat of Citadel White Scar.

I think if I was to get a third model, I might get the Forge World doors to go with it. I also like the idea of making it campaign weary with stowage and some battle damage. Another idea I had was to do an ACAV version similar to the M113 ACAV which was used in Vietnam.

See the workbench feature on the Deimos-pattern Rhino II.

Undercoating the Deimos Pattern Predator Battle Tank

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems. 

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well.

I gave the model an undercoat of Citadel White Scar.

I had removed the turret and sponsons to do the undercoat.

See the workbench feature on the Deimos Pattern Predator Battle Tank.