Category: workbench

Drybrushing more of the Dreadnought

This Space Marine Dreadnought was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”. Having constructed the model I then put it away for a while… I got the model out of storage and decided I would paint this up as an Imperial Fists Dreadnought to accompany my new Deimos-pattern Rhino. I gave it a white undercoatusing White Scar spray. The next stage was the base coat and I did consider to either use a yellow spray, or to use the new Imperial Fist contrast paint. In the end I went with the new Imperial Fist contrast paint and I was quite pleased with the end result. I knew that though this looked quite good, it wasn’t quite the effect I wanted, so I shaded most of the model with Reikland Fleshshade Shade. I painted the weaponry and the exhausts on the Dreadnought with Leadbelcher. For the next stage I used some Citadel Layer Yriel Yellow and undertook a heavy drybrush.

I then gave the model a light drybrush of Citadel Layer Dorn Yellow.

See the workbench feature on the Space Marine Dreadnought.

Inquisitorial Stormtroopers – Tallarn

I have some Daemonhunters Inquisitorial Stormtroopers which are based on the Cadian Kasrkin I decided many years ago to add a unit based on the Tallarn. Having found some Tallarn Heavy Weapons blisters in a box, I dug around to see if I could find my other Tallarn models to finish them off. I did manged to find the boxed set, from which I had based and undercoated the models. I then later found the three models from the blister pack. What did surprise me slightly was I had done some more work on them, but never got around to photographing them for the blog or website. As a result I had forgotten how much progress I had made with them.

I did intend to paint the bases for the model next, but upon checking the workbench feature for my Inquisitorial Stormtroopers, I realised that I needed a paint I didn’t have. For my Inquisitorial Stormtroopers I painted the flocked (well sanded) bases with Bestial Brown and then drybrushed with Bleached Bone. After that I went over the edge of the slottabase again with Bestial Brown.

I didn’t have a pot of Bestial Brown, and Citadel no longer manufacture that colour. According to the Dakka Dakka paint compatibility chart the best option is Mournfang Brown. So, the next time I was out and about I bought a pot of Mournfang Brown. I used this to paint the bases of the Tallarn Imperial Guard.

Check out the workbench feature on the Inquisitorial Stormtroopers (Tallarn Blister).

Working on the Ork barricades and scrap piles

All Mekboyz can perform battlefield repairs using no more than a weighty wrench-hammer, a sack of nails and a healthy dose of gumption, but most do their best work in the comfortably anarchic surrounds of their own workshop. Meks are more than capable of cobbling together a workspace from whatever is lying about, with rudimentary workshops springing up from battlefield wreckage even while the bullets are still flying. Greenskin vehicles roar toward such teetering structures, their crews throwing sacks of teef at the resident Mek – he and his crew get to work immediately, sending the Ork customers on their way with snazzier guns, souped-up engines and extra armour plates.

I had been thinking about getting this kit for a while. So on a shopping trip to my local games shop I decided to make an impulse purchase and buy the box. Well it was nearly 30% cheaper than on the GW site.

Having cleaned the plastic parts I gave them a Corax White undercoat.

I then started painting the basecoat across the scrap piles and barricades using a combination of Base and Contrast Citadel paints.

I continued to paint the different barricades, using, as before, Base and Contrast paints.

On this piece, I used Snakebite Leather contrast paint on the middle door.

Painted the icon on this barricade with Imperial Fist Contrast paint.

I used Blood Angels Red contrast paint on toolbox.

Finished painting part of this scrap pile with Imperial Fist Contrast paint.

Painted the radiator on this barricade with Imperial Fist Contrast paint.

I used Blood Angels Red contrast paint on the tank in the pile.

See the workbench feature on all parts of the Ork Mekboy Workshop.

Painting the base of the Forge World Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while. After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat. Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I gave the model a wash of Nuln Oil Shade. For the next stage I used some Citadel Leadbelcher. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did a lighter drybrush of various silver paints.

I did intend to paint the base for the model next, but upon checking the workbench feature for my Grey Knights, I realised that I needed a paint I didn’t have. For my Grey Knights I painted the flocked (well sanded) bases with Bestial Brown and then drybrushed with Bleached Bone. After that I went over the edge of the slottabase again with Bestial Brown.

I don’t have a pot of Bestial Brown, and Citadel no longer manufacture that colour. According to the Dakka Dakka paint compatibility chart the best option is Mournfang Brown. So, the next time I was out and about I bought a pot of Mournfang Brown. I used this to paint the base of the Dreadnought.

Forge World Grey Knights Dreadnought

Next step will be drybrushing the base.

See the workbench feature on the Grey Knights Dreadnought.

Painting the Deimos Pattern Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here.  I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I also painted the bolter and exhausts with Leadbelcher. I then shaded the model.

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a heavy stippling process added paint to the model.

The plan was that this would take the flat surfaces of the model back to a flatter base colour.

Some of the areas where the shade pooled will probably need some more work.

See the workbench feature on the Deimos Pattern Rhino II.

Painting the Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems. 

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I  painted the main weapon, and the exhausts, with Leadbelcher. It was then onto shading the model.

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a heavy stippling process added paint to the model.

The plan was that this would take the flat surfaces of the model back to a flatter base colour.

Some of the areas where the shade pooled will probably need some more work.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Making progress on the Forge World MkIIb Land Raider

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIb Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage. I wrote up some reflections on my MkIIB Land Raider, on the current state of the painting and what I needed to do next. I had a few issues fixing the bolter guard on the top of the superstructure. I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

I am still painting up the icongraphy. The front ramp is being painted as stone.

Once that is done I will be shading the model to add depth (and weathering).

See the full Mark IIb Land Raider workbench.

Shading the Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems. 

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I  painted the main weapon, and the exhausts, with Leadbelcher.

It was then onto shading the model. I am using the same process I used with my first Deimos Pattern Rhino. I used some Citadel Reikland Fleshshade Shade.

I did a heavier wash than the first Rhino I painted.

This did mean the Shade pooled in certain areas. I am hoping that this will be covered up when I do the deeper drybrushing next.

I also shaded the tracks, this I did with Agrax Earthshade Shade. Once this was dry I drybrushed them with some Leadbelcher.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Shading the Deimos Pattern Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here.  I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I also painted the bolter and exhausts with Leadbelcher.

It was then onto shading the model. I am using the same process I used with my other Deimos Pattern Rhino. I used some Citadel Reikland Fleshshade Shade.

I did a heavier wash than the previous Rhino.

This did mean the Shade pooled in certain areas. I am hoping that this will be covered up when I do the deeper drybrushing next.

I also shaded the tracks, this I did with Agrax Earthshade Shade. Once this was dry I drybrushed them with some Leadbelcher.

See the workbench feature on the Deimos Pattern Rhino II.

Buying some paint

I was shading my new Predator (and Rhino). I used some Citadel Reikland Fleshshade Shade, however after shading most of the models I ran out of paint.

I was in town, so went to MT Games and they were charging £5.00 for a pot of Citadel Reikland Fleshshade Shade.

Now in the Games Workshop stores (or is it Warhammer Stores) in Bristol the cost is £4.75.

My usual place to buy paint is The Games Bunker who sell the same paint pots at the discounted price of £4.05.

In the end I did buy the paint from MT Games, if I was buying a few pots then I probably would have made a special trip  to The Games Bunker and saved myself a few pennies.