workbench Archives - Page 113 of 156

Inquisitorial Stormtroopers

With my Inquisitorial Stormtroopers I was giving them a desert feel I knew I was going to use sand, but also wanted some rocks as well, so I used some slate from the Warhammer 40K Urban Basing Kit. Having added the rocks I then using PVA (white glue) flocked the based with some Games Workshop sand. I do like the sand which has some small larger pieces of gravel, which adds a lot of nice texture. Once dry I then painted the bases Bestial Brown and drybrushed them with Bleached Bone.

See the full workbench feature on my website.

Ork with Rokkit Launcha

This Ork conversion has had a Rokkit Launcha using a metal grenade and Shoota. This is a work in progress. The base is done, the basecoat for the skin is done. Most of the metal work has been drybrushed with Tin Bitz and Boltgun Metal.

Still to do are the skin highlights and more detailing of the belts and clothing.

See the front view of this model.

Full workbench feature on my Orks with heavy weapons.

Grey Knights Land Speeder Crew

Having worked a lot of my Grey Knights Land Speeder, one of the key components is the replacement crew. I could have used the included plastic Space Marine crew, but in the end I used some metal Grey Knights models. I started with a black basecoat and then gave the armour a basecoat of Boltgun Metal. This was followed with the gold metal parts been given a base coat of Brazen Brass.

After painting the base coats for the purity seals and other iconology on the Grey Knights, I gave the purity seals a top coat of Bleached Bone and highlighted with white paint. I then added text and writing using a fine brush and thinned black paint.

See the full workbench feature.

Inquisitorial Stormtroopers – Tallarn

As well as my other Daemonhunters Inquisitorial Stormtroopers which are based on the Cadian Kasrkin I have also decided to add a unit based on the Tallarn or I may just use them as inducted Imperial Guard.

Having given the models a white undercoat, I then gave the models a basecoat of Desert Yellow. This was followed by a wash consisting of Chestnut Ink, Scorched Brown paint (which helps remove the gloss of the ink) and some water to thin the wash down. The models were then drybrushed with a lighter brown to extenuate the detail. The headscarves were picked out with Bleached Bone and highlighted with white paint.

Full workbench feature on this blister of Tallarn Imperial Guard. Workbench feature on the boxed set.

Black Templar Cenobyte with Relic

I have always liked this model, but wasn’t sure a) where it came from, b) what it was called, so I could never find it in the stores or on the online store.

It was only recently when reading through an old White Dwarf that I saw it was part of the Black Templars Chaplain Grimaldus and Retinue Boxed Set.

So now I knew which boxed set it came from, I could work out what it was called and find it in the online store. It is available either as part of a boxed set or individually. As I wasn’t too bothered about the other miniatures in the boxed set I purchased it individually through Mail Order.

I will be using it as part of my Inquisitorial retinue.

Having cleaned the model and basing it with GW modelling sand, I gave the model a white undercoat. I then painted the relic with black paint. I am intending for it to look like grey stone.

See the full workbench feature on the Black Templar Cenobyte with Relic.

Black Templar Cenobyte with Relic

I have always liked this model, but wasn’t sure a) where it came from, b) what it was called, so I could never find it in the stores or on the online store.

It was only recently when reading through an old White Dwarf that I saw it was part of the Black Templars Chaplain Grimaldus and Retinue Boxed Set.

I will be using it as part of my Inquisitorial retinue.

Having cleaned the model and basing it with GW modelling sand, I gave the model a white undercoat.

See the full workbench feature on the Black Templar Cenobyte with Relic.

Mark IIb Land Raider

Having given my Mark IIb Land Raider a black undercoat, it needed a second coat.

This is to be a Grey Knights Land Raider, though I may use it now and again as an Inquisitor transport. Next stage will be the basecoat.

Full workbench feature on the Mark IIb Land Raider.

Grey Knight Librarian

The greatest threat to the Imperium of Man is, and has always been, the followers of Chaos and the foul daemons of the Warp. The Inquisitors of the Ordo Malleus, the Daemonhunters, are at war with forces too terrible to comprehend and, together with the holy warriors of the Grey Knights, they must take the light of the Emperor into the darkness. The threat of the daemonic is so great that only these heroic warriors have the necessary skills and knowledge to stand against such diabolical foes.

I am slowly building up my Grey Knights army.

I purchased the new Space Marine Librarian in Terminator armour as I really do like the model and for me will certainly fit into my Grey Knights army with all the books and purity seals. Obviously it is quite expensive for a single model, but then when has Games Workshop ever made “cheap” models.

Nice model and nice that all the weapon options are included. The model comprises three castings, once I had put these together I gave the model a black undercoat.

A very ornate model, will be fun to paint.

Grey Knights Jetbike

When the Dark Angels were released I really liked the Master of the Ravenwing on the “last” remaining Imperial Jetbike.

Master Sammael of the Ravenwing is a true Angel of Death. From the saddle of his jetbike he cuts down any foolish enough to stand in his path with the infamous Raven Sword, its blade cut from the same meteorite as the Sword of Secrets. A highly accomplished hunter of The Fallen, Sammael is rightly honoured by his brethren and he is feared by his foes as few other holders of his rank have ever been.

So much so I knew I had to get one for my Grey Knights army, possibly maybe more than one! If anyone other than the Master of the Ravenwing was going to have arcane technology it would be the Grey Knights!

These are the metal parts you get in the box.

See my Grey Knights and Daemonhunters workbench.

Ork Desert Fort

One of the things I liked about Cities of Death was the large Ork “town” which was there alongside the ruined Imperial Cities. I know I will never have the time, space or resources to make something similar, but I did like the concept and thought it would be nice to have some buildings for my Ork Airfield, well at least something that could be used alongside my Ork Bommer.

So I took an old DVD-R spindle tub I had, these are available in various sizes depending on how many disks there are, I used a 25 disk tub.

Once you have finished with the disks, you do have the basis for a good building. They come in various sizes as well, 25, 50, 100, therefore you can have different heights as well.

The first thing I did was cut up some plasticard, wooden sticks and Starbucks™ wooden stirrers into similar lengths. I also delved into my bitz box to get some parts, in the main from Imperial vehicles, ie Rhino and Land Raider doors.

Using strips of wood, Starbucks™ stirrers, plasticard, bitz from Imperial vehicles, I stuck them to the side.

Then using a hot glue gun I stuck these to the side of the DVD tub. A hot glue gun is perfect for this kind of thing, as both plastic and super glues are unsuitable for this kind of model.

When I thought about the floor of the fort, I did initially think about adding a series of wooden planks or metal sheets, however in the end I went with using modelling sand, which I think will look quite effective when painted and somewhat Orky.

The next stage was to add rivets using cut plastic rod and plastic sprue.