warhammer the horus heresy Archives - Page 6 of 13

Painting the Deimos Pattern Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here. I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I also painted the bolter and exhausts with Leadbelcher. I then shaded the model.

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a heavy stippling process added paint to the model.

The plan was that this would take the flat surfaces of the model back to a flatter base colour.

Some of the areas where the shade pooled will probably need some more work.

See the workbench feature on the Deimos Pattern Rhino II.

Painting the Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems.

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I painted the main weapon, and the exhausts, with Leadbelcher. It was then onto shading the model.

The plan was that this would take the flat surfaces of the model back to a flatter base colour.

Some of the areas where the shade pooled will probably need some more work.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Making progress on the Forge World MkIIb Land Raider

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIb Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage. I wrote up some reflections on my MkIIB Land Raider, on the current state of the painting and what I needed to do next. I had a few issues fixing the bolter guard on the top of the superstructure. I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

I am still painting up the icongraphy. The front ramp is being painted as stone.

Once that is done I will be shading the model to add depth (and weathering).

See the full Mark IIb Land Raider workbench.

Shading the Predator

It was then onto shading the model. I am using the same process I used with my first Deimos Pattern Rhino. I used some Citadel Reikland Fleshshade Shade.

I did a heavier wash than the first Rhino I painted.

This did mean the Shade pooled in certain areas. I am hoping that this will be covered up when I do the deeper drybrushing next.

I also shaded the tracks, this I did with Agrax Earthshade Shade. Once this was dry I drybrushed them with some Leadbelcher.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Plastic Legion Vindicator

Over on the Warhammer Community website they have previewed a new plastic Legion Vindicator.

The last word in mobile wall-removal packs a massive centerline-mounted demolisher cannon – a huge shell-lobbing bombard that trades the long range of artillery for awesome destructive power. It’s quite content to turn anything it hits into confetti, but excels at cracking Fortifications and other buildings.

Of course Forge World gave us a resin conversion kit many years ago.

The Deimos pattern is an early type of Vindicator used by the Space Marine Legions during the Great Crusade and the Horus Heresy, although many are still operational in the service of Space Marine Chapters in the 41st Millennium. A powerful assault tank, the Vindicator’s principal armament is a heavy-calibre demolisher cannon capable of shattering fortifications and breaching the armour plates of tanks with equal ease. It is invaluable in urban warfare as it can blast and shunt its way through barricades and obstacles, enabling troops following behind free passage through streets that might have otherwise swiftly degenerated into kill zones.

This Forge World Space Wolves Legion Vindicator was on display at Warhammer World.

The new plastic kit also allows you make a Vindicator Laser Destroyer. This Legiones Astartes Ultramarines Deimos Vindicator Laser Destroyer was on display in the cabinets at Warhammer World.

Deimos Vindicator Laser Destroyer at Warhammer World

Another model to add to that wish list.

Shading the Deimos Pattern Rhino

It was then onto shading the model. I am using the same process I used with my other Deimos Pattern Rhino. I used some Citadel Reikland Fleshshade Shade.

I did a heavier wash than the previous Rhino.

This did mean the Shade pooled in certain areas. I am hoping that this will be covered up when I do the deeper drybrushing next.

I also shaded the tracks, this I did with Agrax Earthshade Shade. Once this was dry I drybrushed them with some Leadbelcher.

See the workbench feature on the Deimos Pattern Rhino II.

Plastic Typhon Heavy Siege Tank

Games Workshop having announced back in December that there will be a plastic Heavy Siege Tank for The Horus Heresy, you will be able to pre-order this huge tank on Saturday.

Named for the ‘Great Beast’ of Ancient Terran myth, the immense Typhon Heavy Siege Tank was developed by the Mechanicum alongside the Spartan, with which it shares a basic chassis design. The Typhon’s primary armament is the massive Dreadhammer cannon, and was created in response to a request from the Primarch Peturabo, master of the Iron Warriors. He demanded a Legiones Astartes war engine that could rival the great batteries of the Imperial Crusade Army in firepower, but manoeuvre and deploy at the speed of a Space Marine force.

I’ve always liked the Forge World model and I took a photograph of this Imperial Fists painted model at Warhammer World on a visit a few years ago.

There are some great Horus Heresy models available now and the question I have is, which one do I get next after I finish painting my Land Raiders. I think this one is now top of the list.

Fixing the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece. Well I was pleased to find the missing parts and these have now been reunited with the Land Raider. They were a set of twin bolters and a armoured shell for the bolters.

At the point though of repainting I didn’t glue in the armoured shell, as I knew I would need to paint the bolters first before affixing the shell.

The model was given a white undercoat and then a new basecoat of Daemonic Yellow spray from Army Painter.

I then painted the twin bolters with Leadbelcher.

When it came to fixing the shell in, I had a bit of trouble fitting it into place. It was a bit of a tight fit.

So much so trying to fit the piece I damaged the paintwork on the armoured shell.

I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

Toning down the purity seals

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I recently retrieved it from storage and decided that I would try and finish painting it. I was using Tausept Ochre as the base coat, however having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would paint the Razorback in the same scheme. Having sprayed the underneath of the model with Citadel Zandri Dust. I gave the model a basecoat of Army Painter Daemonic Yellow. This was followed with Leadbelcher for painting the exhausts and weaponry. The next step was painting the iconography and purity seals. I then slightly messed up the shading on the model, but think I managed to get the effect I was looking for. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. The next step was to paint and highlight the iconography. I then glued the tracks to the Razorback using superglue.

I also took the time to brighten up the purity seals and other iconography after it was dulled down by the shades and washes. I also highlighted the purity seals with some White Scar paint.

However, as with my Repressor, I think I overdid this, they are too bright for the model. I decided to dull these down a bit with some Citadel Seraphim Sepia Shade.