Tag: ruined factorum

Having picked up the Ruined Factorum sprue that came with Warhammer 40000 Imperium 31 a couple of weeks back, I also purchased issue 34 for the second sprue .

The ruins are from the The Battlezone: Manufactorum – Sub-cloister and Storage Fane kit which did cost £37.50 at Games Workshop and contains two similar sprues. So at £8.99 you would be making a saving of £9.76.

You get two corner ruins, all coming on a single sprue. They go together really easily. There are two corners, whereas with the other sprue you got a large corner and a smaller corner. This one is similar, but the smaller ruined corner is larger and the larger corner is smaller (if that makes sense).

I used Humbrol Tank Grey 67 spray to give the underfloor a darker feel before giving the model a coat of  Mechanicus Standard Grey Spray.

I gave the models a wash of Nuln Oil Shade.

I got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium 34. The ruins are from the The Battlezone: Manufactorum – Sub-cloister and Storage Fane kit. One I decided I was going to paint in the same manner as the first Ruined Factorum, for the second I chose to follow the (white and red) paint scheme as outlined in Warhammer 40000 Imperium.

Having shaded the larger ruined corner, I had used Nuln Oil for the main shade then I went about using  some Agrax Earthshade Shade and Seraphim Sepia Shade.

Back in April I got a Ruined Factorum sprue in  Warhammer 40000 Imperium issue 31. You get two corner ruins, all coming on a single sprue. Following that I got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium issue 34.  You get another two corner ruins, all coming on a single sprue.

I did manage to pick up a second magazine and decided that I would convert them. It was a relatively simple conversion swapping over the corners. With the larger sides I needed to cut them down.

In issue 48 of Warhammer 40000 Imperium there was a re-release of the sprue from issue 31. With this repeat release of the sprue in issue 48, I decided I would use them for a conversion again. Unlike the other sprue from issue 34, this, one really isn’t suited to swapping corners. This is down to the differences in height. So, what I decided to do was to use the two different sprues from issues 34 and 48 and swap the corners. This would result in four different corner ruins from what I had already.

Having constructed the ruins I gave them a white undercoat, using a Corax White spray.

The first conversion I did took the largest pieces from each sprue. They fitted with no need to trim any of the ruins. I then used the larger floor pieces, which actually worked well together.

The other sides of these ruins go together as well.

This left the smaller corners.

The final corner ruin is quite small, using the smaller corner pieces.

The next stage will be a basecoat of grey paint.

 

Back in April I got a Ruined Factorum sprue in  Warhammer 40000 Imperium issue 31. You get two corner ruins, all coming on a single sprue.

Following that I got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium issue 34.  You get another two corner ruins, all coming on a single sprue.

I did manage to pick up a second magazine and decided that I would convert them. It was a relatively simple conversion swapping over the corners. With the larger sides I needed to cut them down.

In issue 48 of Warhammer 40000 Imperium there was a re-release of the sprue from issue 31. With this repeat release of the sprue in issue 48, I decided I would use them for a conversion again. 

Unlike the other sprue from issue 34, this, one really isn’t suited to swapping corners. This is down to the differences in height. So, what I decided to do was to use the two different sprues from issues 34 and 48 and swap the corners. This would result in four different corner ruins from what I had already.

The first conversion I did took the largest pieces from each sprue. They fitted with no need to trim any of the ruins.

I then used the larger floor pieces, which actually worked well together.

This is quite a large piece of scenery.

The other sides of these ruins go together as well.

This left the smaller corners. They both required some trimming to fit.

The final corner ruin is quite small, using the smaller corner pieces.

The next stage will be a white undercoat.

 

I got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium 34. The ruins are from the The Battlezone: Manufactorum – Sub-cloister and Storage Fane kit. One I decided I was going to paint in the same manner as the first Ruined Factorum, for the second I chose to follow the (white and red) paint scheme as outlined in Warhammer 40000 Imperium.

Having constructed the models I gave them a white undercoat. I sprayed the model a few more times with the Corax White spray. I then, following the instructions painted the doors and window frames with Mephiston Red base paint. The next step was to wash the models with Nuln Oil Shade.

I hadn’t quite got the look I was hoping for, so I decided to do some more shading, using Agrax Earthshade Shade and Seraphim Sepia Shade.

I think the floor looks a lot better as well.

This was much better and, much more the effect I was trying to achieve.

I got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium 34. The ruins are from the The Battlezone: Manufactorum – Sub-cloister and Storage Fane kit. One I decided I was going to paint in the same manner as the first Ruined Factorum, for the second I chose to follow the (white and red) paint scheme as outlined in Warhammer 40000 Imperium.

Having constructed the models I gave them a white undercoat. I sprayed the model a few more times with the Corax White spray. I then, following the instructions painted the doors and window frames with Mephiston Red base paint.

According to the instructions in Warhammer 40000 Imperium the next step was to wash the models with Nuln Oil Shade.

I did this, but realised I wanted a slightly dirtier look as with the GW version. So I used some Agrax Earthshade Shade as well.

I haven’t quite got the look I was hoping for, so I might do some more shading.

Having converted and constructed the Ruined Factorum into two different ruins, the next stage was giving them a white undercoat. Then it was onto painting them and giving them a wash. 

I had got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium 34. The ruins are from the The Battlezone: Manufactorum – Sub-cloister and Storage Fane kit.  You get two more corner ruins, all coming on a single sprue. I did manage to pick up a second magazine and decided that I would convert them. It was a relatively simple conversion swapping over the corners. 

I then drybrushed them using Citadel Dry paints. I first used some Dawnstone Dry Paint and then a lighter drybrush of Terminatus Stone.

I got the Ruined Factorum sprue from the Warhammer Imperium part work, issue #31. I constructed the model, undercoated it, and after giving the model a basecoat of Mechanicus Standard Grey Spray I gave the model a wash of Nuln Oil Shade.

Once the model was dry I drybrushed the model. I first used some Dawnstone Dry Paint and then a lighter drybrush of Terminatus Stone.

These photographs don’t really show the finished model, so I think I will need to retake them. This one taken with a phone does show off the drybrushing much better.

I got a couple of Ruined Factorum sprues that came with Warhammer 40000 Imperium 34. The ruins are from the The Battlezone: Manufactorum – Sub-cloister and Storage Fane kit. There are going to be further releases of these ruin sprues in later issues of Warhammer 40000 Imperium.

Having constructed the models I gave them a white undercoat.

One I am going to paint in the same manner as the first Ruined Factorum I got, the second I am intending to follow the (white and red) paint scheme as outlined in Warhammer 40000 Imperium.

I sprayed the model a few more times with the Corax White spray. I then, following the instructions painted the doors and window frames with Mephiston Red base paint.

The model has two pieces, a larger ruined building and a smaller ruined corner.

The next step will be to wash the model with Nuln Oil Shade.