15mm German SdKfz 251 Half Track

The SdKfz 251 (Sonderkraftfahrzeug 251) half-track was an armored fighting vehicle designed and first built by Germany’s Hanomag company during World War II. One of the most common, and best armoured of the wartime half-tracks, the SdKfz 251 was designed to transport the panzergrenadiers of the German mechanized infantry corps into battle. Widely known simply as “Hanomags” by both German and Allied forces.

This is an old metal model that I think was made by SDD. I have used it as a testbed for which painting method I should use with my Flames of War resin models.

See the workbench feature on the German SdKfz 251 Armoured Half Track.

15mm Ruined Houses

I have the ruined row of three houses and the ruined row of four houses, from Total Battle Miniatures. Having cleaned the models, I gave the inside of the models a black undercoat and then masked the inside of the windows (with masking tape) before I give the model a white undercoat on the outer side of the model.

I then started on the basecoat of the various parts of the building starting with the stonework.

15mm German SdKfz 251 Half Track

The SdKfz 251 (Sonderkraftfahrzeug 251) half-track was an armored fighting vehicle designed and first built by Germany’s Hanomag company during World War II. One of the most common, and best armoured of the wartime half-tracks, the SdKfz 251 was designed to transport the panzergrenadiers of the German mechanized infantry corps into battle. Widely known simply as “Hanomags” by both German and Allied forces, they were widely produced throughout the war, with over 15,252 vehicles and variants produced in total by various manufacturers.

This is an old metal model that I think was made by SDD. I am using it as a testbed for which method I should use with my Flames of War resin models and I suspect in the end it will probably end up as a piece of scenery. However before it gets embedded into a ruin or similar, here are some photographs of it.

SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251

See the workbench feature on the German SdKfz 251 Armoured Half Track.

15mm Ruined Houses

I have the ruined row of three houses and the ruined row of four houses, from Total Battle Miniatures.

Having cleaned the models, I gave the inside of the models a black undercoat and then masked the inside of the windows (with masking tape) before I give the model a white undercoat on the outer side of the model.

The models were then given a white undercoat.

15mm German SdKfz 251 Half Track

The SdKfz 251 (Sonderkraftfahrzeug 251) half-track was an armored fighting vehicle designed and first built by Germany’s Hanomag company during World War II. One of the most common, and best armoured of the wartime half-tracks, the SdKfz 251 was designed to transport the panzergrenadiers of the German mechanized infantry corps into battle. Widely known simply as “Hanomags” by both German and Allied forces, they were widely produced throughout the war, with over 15,252 vehicles and variants produced in total by various manufacturers.

This is an old metal model that I think was made by SDD. I am using it as a testbed for which method I should use with my Flames of War resin models and I suspect in the end it will probably end up as a piece of scenery.

Having given the model a basecoat of Warpaint German Armour the next stage was to add the disruptive camouflage. I thought long and hard about how to do this, and I didn’t have or really wanted to buy an airbrush, even though that appears to be the accepted method for doing late war German camouflage. What I did was take an old paintbrush and cut off the bristles leaving a quarter inch. This brush is then used to stipple on the camouflage pattern. I used Reflective Green (890) and Chocolate Brown (872).

I was quite pleased with the initial effect.

Though the official German manual during the war told how the camo pattern was to be applied, it said the raw paint mixture was to be mixed with petrol and sprayed onto the vehicles. Reality and short supplies of petrol meant that more often the camo pattern was “painted” onto the vehicles, sometimes with brushes and sometimes with rags.

I do like the effect that the airbrush gives these models, I am not sure if I have the requisite skill to do it justice on small models like this.

The next stage was to paint the tyres and tracks and I used German Grey (995). I then gave the models a wash using Devlan Mud wash from Games Workshop.

Quite pleased with the end result, though I think I might have used a lighter or thinner wash next time.

I painted the MG with German Grey (995) and dry brushed the model with Middlestone (882).

See the workbench feature on the German SdKfz 251 Armoured Half Track.

15mm Ruined Houses

One of my Christmas presents was a couple of ruins from Total Battle Miniatures.

I got the ruined row of three houses and the ruined row of four houses.

What you get , if you go for the unpainted version is a nice resin casting.

The first stage was to wash the resin to remove the mould lubricant and then clean the flash from the casting, especially the windows and the doors.

Forged in Battle 15mm French Mortar Team

I was recommended these Forged in Battle miniatures at a gaming shop in Birmingham. They look well casted and a similar size to Flames of War infantry.

The mortar crew were given a basecoat of Green Brown (879) whilst the mortar itself was given a basecoat of Gunship Green (895).

See the workbench feature on the Forged in Battle 15mm French Mortar Team.

Wargames Factory Plastic 15mm German Infantry

Well it looks like another company is getting into the plastic 15mm models suitable for Flames of War or similar world war two games.

Wargames Factory who already make a significiant range of 1/56th and 28mm scale plastic miniatures are working on a range of 15mm sets in plastic. The first of which is Late War German Infantry.

Nothing has been announced about other boxed sets, but will be interesting to see what else that have planned.

15mm P1000 Ratte

From the workbench at Forged in Battle…

15mm P1000 Ratte

If I didn’t know any better I would have said it was the 1st April when I saw this model.

It’s huge! In 15mm scale it’s over a foot long (30cm). Of course in reality it was never built, it never got beyond the drawing stage, with a few plans put together.

Armed with twin 280mm naval guns and powered by two U-Boat engines it would have dominated the landscape before it entered into battle. It would also have been a prime target for allied airpower.

I have written before about Late War Monsters for Flames of War.

I would also like to see some Late War Monsters in a similar vein to the Mid War Monsters that we have seen before. As well as the German Maus, King Tiger II and E series, we could on the allied side see the Centurion and M26 Pershing. There are also the T29 and T30 US Heavy Tanks that could also be fielded.

When I wrote that I didn’t consider the outlandish super heavy tanks, the P1000 Ratte or even the P1500 Monster. Who would have thought that someone would go and make one of these two huge German tank designs.