workbench Archives - Page 3 of 153 - Felix's Gaming Pages

Constructing the ISU-152

One of the Clash of Steel Starter Sets have been on my wants list ever since I found out about them at the beginning of the year. I ordered Operation Unthinkable boxed set containing the British and German tanks.

I decided I would add to the game by ordering the other Operation Unthinkable set, which contains American and Soviet tanks.

The kit also allows you to build the ISU-122 and ISU-152 variants as well. As there are five kits I think I will mix and match the different variants.

The ISU-152, is a tank destroyer based on the IS-2 chassis armed with a 152.4 mm ML-20S gun-howitzer. Since the ISU-152’s gun was mounted in a casemate, aiming it was awkward, and had to be done by repositioning the entire vehicle using the tracks. Therefore, it was used as mobile artillery to support more mobile infantry and armour attacks. It continued service into the 1970s and was used in several campaigns and countries.

The process of constructing the ISU-152 was virtually the same process as building the ISU-130, the main different is the shorter gun barrel.

This is the track sprue.

The kit also allows you to build the ISU-122 and ISU-152 variants as well.

Here are two of the models together.

The next stage is a white undercoat.

Constructing another T28 Super Heavy Tank

I decided I would add to the game by ordering the other Operation Unthinkable set, which contains American and Soviet tanks. In this box there are two T28 Super Heavy Tanks.

The T28 super-heavy tank was an American super-heavy tank/assault gun designed for the United States Army during World War II. It was originally designed to break through German defenses of the Siegfried Line and was later considered as a possible participant in the planned invasion of the Japanese mainland.

This is the GF9 finished model.

This is the sprue.

The kit is relatively easy to construct. I had made one of these up already. I made the second model. Having said it was easy the tracks can be a bit of a challenge.

Here is the finished model.

Here are the two T28 Super Heavy Tanks.

Next stage will be a white undercoat.

Building another IS-3 tank

I decided I would add to the game by ordering the other Operation Unthinkable set, which contains American and Soviet tanks. There are three IS-3 tanks included in the boxed set.

The IS-3 is a Soviet heavy tank developed in late 1944. Its semi-hemispherical cast turret (resembling that of an upturned soup bowl) became the hallmark of post-war Soviet tanks.

I had already constructed one of the IS-3 tanks, so it was a relatively easy process of constructing another one.

Constructing one more King Tiger

The Tiger II (or as was informally known to the Germans who fought in it, Königstiger), was a 70 tonne heavy tank.

Having constructed one of the King Tiger models, I started making the second one.

Having had a few issues with magnets recently, for this model I decided not to use magnets on this model.

As with the other Operation Unthinkable models, it is quite simple to construct. The next stage will be a white undercoat.

Reflecting on the construction of the Arvus Lighter

One of the reveals at the World Championships Preview back in November was a plastic Arvus Lighter for The Horus Heresy. I ordered one from my FLGS.

The Arvus Lighter is a small, general purpose cargo shuttle that is widely used by the Imperium of Man for many tasks, both in space and on the surface of planets. The Arvus is commonly used by both Imperial Navy warships and Imperial merchant vessels, including Rogue Traders. The Arvus is just one of many types of small, void-capable shuttles used by the Imperium. The Arvus is piloted by a single pilot, and is not equipped with any weapon systems, in fact, the Arvus possesses only the most basic navigation equipment, external sensors, and proximity alarms. The Arvus has a powerful engine that allows it to carry heavy cargo to and from a planet’s surface

I like this model, though released for The Horus Heresy, I suspect it would make a great model for, not just Warhammer 40K, but also Necromunda. One of the additions to the plastic version of the Arvus Lighter model is a rear ramp gunner.

With most of my models I constructed them fully and then paint them. This is okay for many of my models, but I have with a few undertaken some part-assembly, then painting before putting the whole model together. One example of this on my workbench is the Typhon Heavy Siege Tank where I painted the tracks, sponsons and main weapon separately before putting them together.

Having reflected a bit more on the Arvus Lighter model, I have decided I will model the interior and have the ramp gunner as well.

I realised as I looked at the sprues and the instructions that I would need to paint some of the interior just for the pilot, and if I was going down that road I might as well do all the interior. As painting the cockpit and the canopy would mean having sub-assemblies anyhow.

I also want to add detail to the inside of the Arvus Lighter, which already has some details in terms of seating. I will add additional equipment, straps and personal equipment to enhance the model.

So I will do some partial assemblies and then put the model together at the end.

There will be the sides, the base of the flyer with the cockpit, and the top superstructure with the wings and the engines.

I will model the Arvus Lighter with the undercarriage down, so that as well as using the flying stand, I can also use the Arvus Lighter in a landed mode. Though in this instance I might need to model the ramp gunner so that he can be removed. As he is shooting downwards, and this would look out of place when the Arvus Lighter is landed.

I am also going to go with the camouflage scheme I used with my Aeronautica Imperialis Valkyrie transports.

Constructing the 15mm Comet (A34)

The Comet (A34) was a British cruiser tank that first saw use near the end of World War II. It was designed to provide greater anti-tank capability to Cromwell tank squadrons. It was armed with a 77mm HV, a derivative of the 17 pounder, with the result it was one of the few British tanks with the firepower to challenge late war German designs.

I have the Operation Unthinkable boxed set containing the British and German tanks. The GF9 Operation Unthinkable boxed set, the British versus German, contains 17 tanks, three of which are the A34 Comet Cruiser Tank.

This is the GF9 finished model.

This the sprue.

With three models I decided I would vary construction. One would be as indicated in the instructions.

For the other two I decided I would add some commanders (which are included in the Operation Unthinkable boxed set). I also used the stowage from the American tanks I got in the other box.

For one model I did add significant amounts of stowage.

The other less so.

Here are the three constructed Comet tanks.

I decided to use magnets with the turrets, and I kind of wish I hadn’t. I had trouble getting them to both fit and when glueing them into position I eventually got it sorted.

The next step will be a white undercoat.

I do have four more plastic Comet Flames of War kits on the workbench as well.

Constructing another King Tiger

The Tiger II (or as was informally known to the Germans who fought in it, Königstiger), was a 70 tonne heavy tank.

Having constructed one of the King Tiger models, I started making the second one.

As with the other Operation Unthinkable models, it is quite simple to construct. Once finished,the next stage will be a white undercoat.

Another Tortoise Heavy Assault Tank

There are 17 tanks, two of which are the Tortoise heavy assault tank. One I had already constructed, decided to put together the second one as well.

The Tortoise heavy assault tank (A39) was a British heavy assault gun design developed during the Second World War, but never put into mass production. It was developed for the task of clearing heavily fortified areas such as the Siegfried Line and as a result favoured armour protection over mobility.

The next stage will be a white undercoat.

Plastic Arvus Lighter on display at Warhammer World

On my previous visit to Warhammer World I took various photographs of the resin Forge World model which was on display. On my most recent visit in June 2025 I was able to take a photograph of the new(ish) plastic Arvus Lighter in the display cabinets.

Comparing the plastic version to the resin version there are some subtle differences.

The main areas are in the engine cowling and around the cockpit. Otherwise these are very similar models.

I have the new Horus Heresy plastic Arvus Lighter on my workbench.

Constructing the IS-3

I decided I would add to the game by ordering the other Operation Unthinkable set, which contains American and Soviet tanks.

The IS-3 is a Soviet heavy tank developed in late 1944. Its semi-hemispherical cast turret (resembling that of an upturned soup bowl) became the hallmark of post-war Soviet tanks.

This is the GF9 finished model.

This is the sprue.

The model is quite simple to construct.

This is quite a large tank.

The next step will be a white undercoat.