flames of war Archives - Page 36 of 41

Flames of War German Panzergrenadier Headquarters

I purchased a Flames of War box of the German Panzergrenadier Headquarters. In the box you get a bunch of resin, plastic and metal.
It’s a challenge though to see what goes where and on which bases which models go. I do think that there needs to be either better instructions in the box, or at least a good and explanatory guide on the Flames of War website. This is not the first or last model from Flames of War that has left me confused about what is what and where it goes on the model. It’s not even entirely clear about which infantry go together or clear instructions on how to base them.

Having said that once you know what goes where, the half tracks go together quite easily, though for some reason I got some super glue “ghosting” on the model.

The machine guns and gun shields were quite fiddly and do feel quite delicate.

I still need to add the main frontal armament, any crew and the crew equipment.

One thing I do like about FoW models is that in this set you get three different half track hulls rather than three of a single mould.

Here is one of the SdKfz 251s with a Tiger 1 E tank.

See the workbench feature on this boxed set.

Flames of War Tiger I E

The Tiger was feared so much by the Allies, that most German tanks were referred to as Tiger tanks. Tiger I is the common name of a German heavy tank used in World War II, developed in 1942. The final official German designation was Panzerkampfwagen Tiger Ausf. E, often shortened to Tiger. It was an answer to the unexpectedly formidable Soviet armour encountered in the initial months of Operation Barbarossa, particularly the T-34 and the KV-1. The Tiger I design gave the Wehrmacht its first tank mounting the 88 mm gun, which had previously demonstrated its effectiveness against both air and ground targets. During the course of the war, the Tiger I saw combat on all German battlefronts. It was usually deployed in independent tank battalions, which proved to be quite formidable.

This is the Flames of War German Tiger I E. I was quite surprised by how many parts were in the blister. This wasn’t going to be a quick model to put together, especially with no instructions!

I decided to model the tank with the turret hatch closed. I first though glued the main gun into position and added the two turret hatches. I then added the two side skirts. These were quite challenging to glue to the side of the model.

I wasn’t entirely clear about the front hull hatches, there appeared to be four provided in the kit. I did look at a few models online, but wasn’t entirely clear about how they were stuck. I also almost missed the hull machine gun.

The final stage was gluing the tracks into place.

The other side.

The next stage is going to be a white undercoat.

See the full workbench feature on the Flames of War Tiger 1E.

Flames of War Russian Armoured Train

Really enjoyed reading the article on a Russian Armoured Train on the Flames of War website.

The article has the historical background on how one of the Polish Armoured Trains was captured by the Soviet Union, re-painted and pressed into service. The article also shows how to paint the model.

I do like the look of the model and the green train with red stars is very effective, and as a model I much prefer it over the three colour camouflage of the Polish version.

Interestingly the train in question was later captured by the Germans and they used it.

Flames of War German Panzergrenadier Headquarters

I purchased a Flames of War box of the German Panzergrenadier Headquarters.

In the box you get a bunch of resin, plastic and metal.

I like the fact that you get three different half tracks.

It’s a challenge though to see what goes where and on which bases which models go. I do think that there needs to be either better instructions in the box, or at least a good and explanatory guide on the Flames of War website. This is not the first or last model from Flames of War that has left me confused about what is what and where it goes on the model. It’s not even entirely clear about which infantry go together or clear instructions on how to base them.

See the workbench feature on this boxed set.

Flames of War British Light Tanks

These nice looking British Light Tanks are from Simon’s collection.

I’ve always liked the British Light Tank and this is a really nice model.

Vickers Light Mark VI B/C – Developed in the late ’30s as a nimble reconnaissance tank, the Mark VI saw service in France and the opening stages of the Desert War.

Flames of War Challenger A30

The Tank, Cruiser, Challenger (A30) was a British tank of World War 2. It mounted the 17 Pounder gun on the Cromwell chassis to add heavier anti-tank firepower to the cruiser tank units.

This is the Flames of War blister of the British Challenger A30 Tank.

Within the blister, as with a lot of FoW models, you get a resin hull and turret and metal tracks and accessories.

See the full workbench feature on my Challenger A30.

Flames of War Cromwell IV

The Cromwell Tank was one of the most successful series of cruiser tanks fielded by Britain in World War II.

The Cromwell tank, named after the English Civil War leader Oliver Cromwell, was the first tank in the British arsenal to combine a dual-purpose gun, high speed from the powerful and reliable Meteor engine, and reasonable armour, all in one balanced package. Its design formed the basis of the Comet tank. The Cromwell first saw action in June 1944, with the reconnaissance regiments of the Royal Armoured Corps.

This is the Flames of War blister of the British Cromwell Tank.

In the blister you get a resin hull and turret and the rest of the model is in whitemetal.

You also get the option to make it a CS Centaur version.

See the full workbench feature on my Cromwell IVs. In the end I picked up a couple more to make a full platoon.

Flames of War German Panther A Platoon

I bought this box set as it was available at Hobbycraft for a much cheaper price than the list price.

The Panther is the common name of a medium tank fielded by Nazi Germany in World War II that served from mid-1943 to the end of the European war in 1945. It was intended as a counter to the T-34, and to replace the Panzer III and Panzer IV; while never replacing the latter, it served alongside it as well as the heavier Tiger tanks until the end of the war. The Panther’s excellent combination of firepower, mobility, and protection served as a benchmark for other nations’ late war and immediate post-war tank designs, and it is frequently regarded as one of the best tank designs of World War II.

Flames of War Tiger I E

The Tiger was feared so much by the Allies, that most German tanks were referred to as Tiger tanks.

Tiger I is the common name of a German heavy tank used in World War II, developed in 1942. The final official German designation was Panzerkampfwagen Tiger Ausf. E, often shortened to Tiger. It was an answer to the unexpectedly formidable Soviet armour encountered in the initial months of Operation Barbarossa, particularly the T-34 and the KV-1. The Tiger I design gave the Wehrmacht its first tank mounting the 88 mm gun, which had previously demonstrated its effectiveness against both air and ground targets. During the course of the war, the Tiger I saw combat on all German battlefronts. It was usually deployed in independent tank battalions, which proved to be quite formidable..

This is the Flames of War blister of the German Tiger I E.