Starting again…

Probably my favourite Indiana Jones film is Indiana Jones and the Last Crusade. The combination of archaeology, mythology, nazi soldiers and lots of wonderful pulp action.  Though we know the tank wasn’t real, and there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank.

I wrote back in 2012 about finding a 28mm model of the tank, since then I found it was available from Empress Miniatures, I was able to order it and go through the resin pieces and constructing the Mark IX Beast.

Following the application of the white undercoat, I started the base coat of Vallejo 70912 Tan Yellow on the Mark IX Beast tank.

Though this photograph isn’t quite showing the right colour, I decided, again looking at the source material that this colour was too dark, especially as I wanted to wash it with a shade or ink.

So I took it back to the garage and gave it a spray of white to cover the basecoat and provide a lighter base for a sandstone or light brown colour.

I didn’t do a full respray as I am quite happy for some of the undersides to be darker than the top of the model.

As for the new base coat, that I am still considering. What colour I use is dependent on what I have in my box, challenging to buy paints easily at this time. I Have a Flames of War German Camo Beige 821 which looks like it might work.

See the full workbench feature on the Mark IX Beast tank.

Basecoating the Mark IX Beast

Probably my favourite Indiana Jones film is Indiana Jones and the Last Crusade. The combination of archaeology, mythology, nazi soldiers and lots of wonderful pulp action.  Though we know the tank wasn’t real, and there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank.

I wrote back in 2012 about finding a 28mm model of the tank, since then I found it was available from Empress Miniatures, I was able to order it and go through the resin pieces and constructing the Mark IX Beast.

Following the application of the white undercoat, I started the base coat of Vallejo 70912 Tan Yellow.

Having given the model another look, I think this colour is too dark, especially as I am anticipating giving it a dark wash over the base coat.

that tank from Indiana Jones

What colour I use is dependent on what I have in my box, challenging to buy paints easily at this time. I have a Flames of War German Camo Beige 821 which looks like it might work.

I also thought looking at the film footage whether I should re-arrange the stowage and baggage.

I did follow the example on the Empress Miniatures website as my guide. So most of the stowage is on the back of the tank.

Mark IX Beast

However looking at the film footage, they didn’t do this on their tank. Most of the stowage is on the sides. There is none on the sponsons, nor on the turret.

Though this side of the tank looks more like the one in the film, from a stowage perspective.

See the full workbench feature on the Mark IX Beast tank.

Undercoating the Mark IX Beast

Probably my favourite Indiana Jones film is Indiana Jones and the Last Crusade. The combination of archaeology, mythology, nazi soldiers and lots of wonderful pulp action.  Though we know the tank wasn’t real, and there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank.

Having constructed the model I gave the tank a white undercoat.

I did the underneath first followed by the top.

The turret was undercoated separately.

See the full workbench feature on the Mark IX Beast tank.

Constructing the Mark IX Beast

Probably my favourite Indiana Jones film is Indiana Jones and the Last Crusade. The combination of archaeology, mythology, nazi soldiers and lots of wonderful pulp action.  Though we know the tank wasn’t real, and there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank. It appears at first glance to be a Mark VIII with a turret, the reality was that it was built specially for the film and was built up from an excavator.

I wrote back in 2012 about finding a 28mm model of the tank, since then I found it was available from Empress Miniatures, I was able to order it and go through the resin pieces.

This is quite a big model. The first stage was to glue the two track units to the main hull. I stuck them together and then used weights to ensure that the join was secure.

I then added the sponsons, one at a time. I also added the turret hatch to the turret and the main weapon. This was a challenging as there wasn’t much of a way to join the main weapon to the turret, so I got the drill out.

I did something similar with the sponson guns.

The periscope (which I worked out from watching the film) was then added, as was all the stowage.

You can see how big this model is compared to other 28mm models. Here it is next to the Bolt Action Citroen Civilian 4,500kg Truck with Canopy.

This is the tank next to my Tally Ho Rolls Royce Armoured Car.

The next stage will be a white undercoat.

See the full workbench feature on the Mark IX Beast tank.

The Mark IX Beast has arrived

that tank from Indiana Jones

Probably my favourite Indiana Jones film is Indiana Jones and the Last Crusade. The combination of archaeology, mythology, nazi soldiers and lots of wonderful pulp action.  Though we know the tank wasn’t real, and there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank. It appears at first glance to be a Mark VIII with a turret, the reality was that it was built specially for the film and was built up from an excavator.

I wrote back in 2012 about finding a 28mm model of the tank.  I did think about buying it back then, but put off my purchase. It was originally made by the Honourable Lead Boiler Suit Company (HLBSCo). I did some web searching and found that the tank is available today from Empress Miniatures. Well I made the leap and ordered the tank from Empress Miniatures.

It arrived in a small brown box, but it is quite a big model. The model consists of two large complete track units.

The main hull.

I was impressed with the quality of the sculpting and the castings.

There are separate sponsons as well as the turret and the turret hatch.

You also get as part of this kit, a range of stowage and baggage. When this was sold by Copplestone Castings, the baggage was an add-on extra to the model.

You can break this down into bundles of tarpaulins or other materials (maybe tents) as well as what are probably roles of barbed wire, or telephone cables.

Then there are wooden beams, jerry cans and what look like metal storage containers.

I did start to then look at the original film and stills to see how I could add the stowage to the tank.

A slightly wider shot of the other side of the tank.

The stowage supplied is similar, but doesn’t quite match what we see on the prototype, but this model isn’t supposed to be an exact copy, it’s more like “inspired by” the film tank.

The next step will be to start constructing the tank.

See the full workbench feature on the Mark IX Beast tank.

Mark IX Beast, or that tank from Indiana Jones!

Probably my favourite Indiana Jones film is Indiana Jones and the Last Crusade. The combination of archaeology, mythology, nazi soldiers and lots of wonderful pulp action. Watching it recently I was reminded of that tank!

Though we know it wasn’t real, and though we know that there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank.

Yes the tank from Indiana Jones and the Last Crusade.

Tank from Indiana Jones and the Last Crusade

It appears at first glance to be a Mark VIII with a turret, the reality was that it was built specially for the film and was built up from an excavator.

Mechanical effects supervisor George Gibbs said this movie was the most difficult one of his career. He visited a museum to negotiate renting a small French World War I tank, but decided he wanted to make one. The tank was based on the tank Mark VIII, which was thirty-six feet (eleven meters) long, and weighed twenty-five tons. Gibbs built the tank over the framework of a twenty-five ton excavator, and added 6.4 ton tracks, that were driven by two automatic hydraulic pumps, each connected to a Range Rover V8 engine. Gibbs built the tank from steel, rather than aluminum or fiberglass, because it would allow the realistically suspensionless vehicle to endure the rocky surfaces. Unlike its historical counterpart, which had only the two side guns, the tank had a turret gun added as well. It took four months to build, and was transported to Almería on a Short Belfast plane, and then a low loader truck.

Tank from Indiana Jones and the Last Crusade

I wrote back in 2012 about finding a 28mm model of the tank. I did think about buying it back then, but put off my purchase. I thought back then it was a Copplestone Castings model, the reality was that it wasn’t from Copplestone Castings.

So it appeared that it wasn’t even a Copplestones Castings, but was by the Honourable Lead Boiler Suit Company (HLBSCo), alas that company no longer is around.

Sometimes you should buy things when you see them and not wait…

So it was originally designed and manufactured by the Honourable Lead Boiler Suit Company (HLBSCo) they were small and relatively new. I even remember discussing licensing the models for a commercial version of Tally Ho!

So I did some searching on the Google and found that the tank is available today with the other HLBSCo models from Empress Miniatures.

Well I made the leap and have ordered the tank from Empress Miniatures. This is the photograph of the model on their website.

Mark IX Beast

Now just waiting for it to arrive.

Mark VIII “The International” Tank

This Mark VIII “The International” Tank was on display at Bovington Tank Museum. It is the last remaining survivor of the six Mark VIII tanks which were completed for Britain.

Mark VIII "The International" Tank

When the United States declared war on Germany in 1917 the US Army started to look at tanks. They favoured the American Renault as their light tank but used British Mark V and Mark V* tanks for their heavy battalion. However they had their own ideas on tank design and, in co-operation with the British Tank Corps came up with a new heavy tank design for 1919.

The Mark VIII tank also known as the Liberty or The International was an Anglo-American tank design of the First World War intended to overcome the limitations of the earlier British designs and be a collaborative effort to equip France, the UK and the US with a single heavy tank design.

Production at a site in France was expected to take advantage of US industrial capacity to produce the automotive elements, with the UK producing the armoured hulls and armament. The planned production levels would have equipped the Allied armies with a very large tank force that would have broken through the German defensive positions in the planned offensive for 1919. In practice manufacture was slow and only a few vehicles were produced before the end of the war in November 1918.

Many people have thought that the tank used in the Indiana Jones and the Last Crusade film was a Mark VIII. However that tank was specially created for the film, inspired though somewhat by the Mark VIII.

Tank from Indiana Jones and the Last Crusade

Mechanical effects supervisor George Gibbs said this movie was the most difficult one of his career. He visited a museum to negotiate renting a small French World War I tank, but decided he wanted to make one. The tank was based on the tank Mark VIII, which was thirty-six feet (eleven meters) long, and weighed twenty-five tons. Gibbs built the tank over the framework of a twenty-five ton excavator, and added 6.4 ton tracks, that were driven by two automatic hydraulic pumps, each connected to a Range Rover V8 engine. Gibbs built the tank from steel, rather than aluminum or fiberglass, because it would allow the realistically suspensionless vehicle to endure the rocky surfaces. Unlike its historical counterpart, which had only the two side guns, the tank had a turret gun added as well. It took four months to build, and was transported to Almería on a Short Belfast plane, and then a low loader truck.

I had meant to buy what I thought was a Copplestone Castings’ Mark IX Beast, a similar model of the Indiana Jones tank, but it appeared that it was no longer manufactured or sold by North Star Figures.

So it appeared that it wasn’t even a Copplestones Castings, but was by the Honourable Lead Boiler Suit Company (HLBSCo).

Sometimes you should buy things when you see them and not wait…

So it was originally designed and manufactured by the Honourable Lead Boiler Suit Company (HLBSCo) they were small and relatively new. I even remember discussing licensing the models for a commercial version of Tally Ho!

So I did some searching on the Google and found that the tank is available today with the other HLBSCo models from Empress Miniatures.

Mark IX Beast

Tanking in the Last Crusade

Tank from Indiana Jones and the Last Crusade

Though we know it wasn’t real, and though we know that there was no actual historical version of it; I am sure most of us who have thought about recreating the Indiana Jones films on the table have wanted to use that tank.

Yes the tank from Indiana Jones and the Last Crusade.

Tank from Indiana Jones and the Last Crusade

It appears at first glance to be a Mark VIII with a turret, the reality was that it was built specially for the film and was built up from an excavator.

Mechanical effects supervisor George Gibbs said this movie was the most difficult one of his career. He visited a museum to negotiate renting a small French World War I tank, but decided he wanted to make one. The tank was based on the tank Mark VIII, which was thirty-six feet (eleven meters) long, and weighed twenty-five tons. Gibbs built the tank over the framework of a twenty-five ton excavator, and added 6.4 ton tracks, that were driven by two automatic hydraulic pumps, each connected to a Range Rover V8 engine. Gibbs built the tank from steel, rather than aluminum or fiberglass, because it would allow the realistically suspensionless vehicle to endure the rocky surfaces. Unlike its historical counterpart, which had only the two side guns, the tank had a turret gun added as well. It took four months to build, and was transported to Almería on a Short Belfast plane, and then a low loader truck.

Now regular readers of my blog may remember this photo.

The Talisman Archaeologist from Talisman Timescape

The Talisman Archaeologist from Talisman Timescape is very much an Indy lookalike and many years ago I started to formulate a series of rules and background for creating games in an Indiana Jones style universe that was called Tally Ho!

I always wanted to get a World War One era tank to fit into the game and recreate that battle with the tank from the Last Crusade film.

Well now I can get a 28mm tank just like that one from the film. Copplestone Castings have released the K64 Mark IX Beast Super-Heavy Tank and Accessory Pack.

Mark IX Beast

This is an almost perfect replica of that tank from that film.

Really impressed with the look and quality, might get one. As for rules, well I will probably mash up the rules from The Great War with the Old West. Or even just the Great War rules.