warhammer the horus heresy Archives - Page 15 of 22

Reinforcements have arrived

My latest model to hit the workbench is the Typhon Heavy Siege Tank.

Named for the ‘Great Beast’ of Ancient Terran myth, the immense Typhon Heavy Siege Tank was developed by the Mechanicum alongside the Spartan, with which it shares a basic chassis design. The Typhon’s primary armament is the massive Dreadhammer cannon, and was created in response to a request from the Primarch Peturabo, master of the Iron Warriors. He demanded a Legiones Astartes war engine that could rival the great batteries of the Imperial Crusade Army in firepower, but manoeuvre and deploy at the speed of a Space Marine force.

I’ve always liked the Forge World model and I took a photograph of this Imperial Fists painted model at Warhammer World on a visit a few years ago.

There are some great Horus Heresy models available and I am pleased to add this one to my collection.

I will be painting them the same way I painted my other Horus Hersey models.

Drybrushing the Deimos Pattern Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here. I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I also painted the bolter and exhausts with Leadbelcher. I then shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush.

I then added some more Citadel Layer Yriel Yellow to the model.

I then gave the model a lighter drybrush of Citadel Layer Dorn Yellow.

See the workbench feature on the Deimos Pattern Rhino II.

Legion Reinforcements

Next week you will be able to pre-order some Legion reinforcements for The Horus Heresy.

There is the Cerberus Heavy Tank Destroyer.

The massive Cerberus Heavy Tank Destroyer is an armoured beast, mounting a triple-barrelled neutron laser battery onto a rugged Spartan hull to create a devastatingly focused anti-tank weapon. It can detonate tanks in a single blast while shrugging off return fire like it’s nothing – everything you want in a Lord of War.

I prefer the Typhon Heavy Siege Tank. Given the choice between the Cerberus and the Typhon, I would choose the Typhon. I just think it is a better looking tank.

There is also the Sicaran Venator Tank Hunter.

If you prefer your anti-tank options a little more discrete, the Sicaran Venator trades mass for speed and can wind its way around enemy flanks before lancing neutron beam laser blasts right through the sides of opposing tanks.

I am not a fan of this tank, so it won’t be added to my (long and) never-ending wish list.

Drybrushing the Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems.

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I painted the main weapon, and the exhausts, with Leadbelcher. It was then onto shading the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush.

I then added some more Citadel Layer Yriel Yellow to the model.

I then gave the model a lighter drybrush of Citadel Layer Dorn Yellow.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Drybrushing more of the Dreadnought

This Space Marine Dreadnought was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”. Having constructed the model I then put it away for a while… I got the model out of storage and decided I would paint this up as an Imperial Fists Dreadnought to accompany my new Deimos-pattern Rhino. I gave it a white undercoatusing White Scar spray. The next stage was the base coat and I did consider to either use a yellow spray, or to use the new Imperial Fist contrast paint. In the end I went with the new Imperial Fist contrast paint and I was quite pleased with the end result. I knew that though this looked quite good, it wasn’t quite the effect I wanted, so I shaded most of the model with Reikland Fleshshade Shade. I painted the weaponry and the exhausts on the Dreadnought with Leadbelcher. For the next stage I used some Citadel Layer Yriel Yellow and undertook a heavy drybrush.

I then gave the model a light drybrush of Citadel Layer Dorn Yellow.

See the workbench feature on the Space Marine Dreadnought.

Painting the Deimos Pattern Rhino

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a heavy stippling process added paint to the model.

The plan was that this would take the flat surfaces of the model back to a flatter base colour.

Some of the areas where the shade pooled will probably need some more work.

See the workbench feature on the Deimos Pattern Rhino II.

Painting the Predator

The plan was that this would take the flat surfaces of the model back to a flatter base colour.

Some of the areas where the shade pooled will probably need some more work.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Making progress on the Forge World MkIIb Land Raider

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIb Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage. I wrote up some reflections on my MkIIB Land Raider, on the current state of the painting and what I needed to do next. I had a few issues fixing the bolter guard on the top of the superstructure. I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

I am still painting up the icongraphy. The front ramp is being painted as stone.

Once that is done I will be shading the model to add depth (and weathering).

See the full Mark IIb Land Raider workbench.

Shading the Predator

It was then onto shading the model. I am using the same process I used with my first Deimos Pattern Rhino. I used some Citadel Reikland Fleshshade Shade.

I did a heavier wash than the first Rhino I painted.

This did mean the Shade pooled in certain areas. I am hoping that this will be covered up when I do the deeper drybrushing next.

I also shaded the tracks, this I did with Agrax Earthshade Shade. Once this was dry I drybrushed them with some Leadbelcher.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Plastic Legion Vindicator

Over on the Warhammer Community website they have previewed a new plastic Legion Vindicator.

The last word in mobile wall-removal packs a massive centerline-mounted demolisher cannon – a huge shell-lobbing bombard that trades the long range of artillery for awesome destructive power. It’s quite content to turn anything it hits into confetti, but excels at cracking Fortifications and other buildings.

Of course Forge World gave us a resin conversion kit many years ago.

The Deimos pattern is an early type of Vindicator used by the Space Marine Legions during the Great Crusade and the Horus Heresy, although many are still operational in the service of Space Marine Chapters in the 41st Millennium. A powerful assault tank, the Vindicator’s principal armament is a heavy-calibre demolisher cannon capable of shattering fortifications and breaching the armour plates of tanks with equal ease. It is invaluable in urban warfare as it can blast and shunt its way through barricades and obstacles, enabling troops following behind free passage through streets that might have otherwise swiftly degenerated into kill zones.

This Forge World Space Wolves Legion Vindicator was on display at Warhammer World.

The new plastic kit also allows you make a Vindicator Laser Destroyer. This Legiones Astartes Ultramarines Deimos Vindicator Laser Destroyer was on display in the cabinets at Warhammer World.

Deimos Vindicator Laser Destroyer at Warhammer World

Another model to add to that wish list.