Iconography on the Inquisitorial Repressor

The Repressor tank is often used by Sisters of Battle as transport, and by the Adeptus Arbites in an anti insurgency role. I said  in a blog post back in 2004.

“I do like this model and I am intending to get one to use with my Daemonhunters army as a transport for the Storm Troopers”.

I did get one that Christmas as a present. Though I actually started building and painting this model back in 2007, I recently retrieved it from storage and decided that I would try and finish painting it. I realised I had made quite significant progress and it wouldn’t take too long to finish it off.

Having sprayed the model with Citadel Zandri Dust. I started the detailing, using Leadbelcher on the weapons and the exhausts. The next step was painting the iconography and purity seals.

I decided that I would go down the full inquisitorial look for the iconography, as opposed to doing stone or bronze on some of my other vehicles.

For the skull I used Ushabti Bone. Once shaded this will then be highlighted with more Ushabti Bone and then White Scar for the highlights.

I painted the inner part of the Inquisition symbol with Mephiston Red. The outer part was done with Retributor Armour. I was pleased with how this went and how it looks.

I painted the purity seals using Ushabti Bone for the paper and for the wax seals I used Mephiston Red.

For the eagle and Inquisitorial symbol on the back ramp I used Retributor Armour.

The next step will be shading the model.

Iconography on the Razorback

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I started this model back then, then out it in storage. I recently retrieved it from said storage and decided that I would try and finish painting it. I was using Tausept Ochre as the base coat, however having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would paint the Razorback in the same scheme.

Having sprayed the underneath of the model with Citadel Zandri Dust. I gave the model a basecoat of Army Painter Daemonic Yellow. This was followed with Leadbelcher for painting the exhausts and weaponry.

The next step was painting the iconography and purity seals. Purity seals were Ushabti Bone for the paper and Mephiston Red for the red wax.

For the brass etchings, I did consider painting these up, but in the end I painted them with a base coat of Warplock Bronze.

I had intended to use Sycorax Bronze, however my post of this was a little dried up… so I had to throw it away.

I did try out a wash on the main weaponry to see the effect it would have on the bronze painted iconography.

I also painted the door panels with Warplock Bronze.

This is the front of the Razorback.

I painted the front icon with Mechanicus Standard Grey aiming for a stone effect, after shading and drybrushing.

See the full workbench of the Razorback.

Continuing the Forgeworld Grot Bomb Launcha

The Forgeworld Grot Bomb Launcha is probably one of my all time favourite models.  I have three of these, one is finished, the other two are a work in progress. Having painted the chassis with a spray of Citadel Zandri Dust. I painted the exhausts and the rear deck with Leadbelcher. I then gave the model a wash using Citadel Shade Agrax Earthshade. I drybrushed the model. I gave the tracks a heavy drybrush of Gorthor Brown, followed by a lighter drybrush of Leadbelcher.

I used some Agrax Earthshade on the fuel tank and the leather seat.

I then drybrushed the launcha with Leadbelcher. This is the right one for this Grot Bomb Launcha and is slightly warped. I also used some Seraphim Sepia to add some rust style effects.

This is the launcha on the Wartrakk.

Now to find the rider.

 

Forgeworld Ork Aircraft Traktor

The Ork Aircraft Traktor is used to taxi Ork aircraft in position to launch, where it takes off discarding the launch trolley. the Aircraft Traktor also recovers landed Ork aircraft for refueling.

One of the gifts I got for a birthday many years ago was the Forgeworld Ork Aircraft Traktor and Launch Trolley.

The model consists of the plastic Wartrakk and some resin pieces for the fuel bowser, a resin launch trolley and a towing bar. I have nearly finished painting it, so decided it was time I did finish painting it.

Having touched up the fuel tank with some white paint I then used Snakebite Leather Contrast paint to paint the leather seat and the fuel tank.

I used Blood Angels Red on the other part of the motorbike.

I also started looking at the launch trolley and thinking about finishing up the tyres.

Looking again at my Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while.

After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat.

Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I sprayed the arms separately.

I then attached the weapon arms.

Next stages will be washing and highlighting.

See the full workbench feature on my Grey Knights Dreadnought.

Ork Trukk with Enclosed Cab

Ork Trukk with Enclosed Cab

Designed by Will Hayes and Phil Stutcinskas. (a hybrid resin and plastic model using the Ork Trukk kit). —The model makes for a great alternative for your Trukk fleet as well as an excellent base for your own conversions. Its enclosed cab can also be used to represent the Armour Plates upgrade on a trukk.

This Trukk model also includes a folding platform at the rear. This in my opinion is much better than the plastic platform included with the plastic kit.

I made my with the sides fixed in the upright position.

The chassis was constructed as per the instructions, though like my other Trukk as I had spare wheels I gave the model all rounded wheels rather than the mix that comes as standard with the kit.

The next step will be a white undercoat.

Going back to the Ork Halftrakk

January 2008 saw the release of the new Ork Trukk. I had expected to see some Forge World conversion kits relatively quickly, however though we saw the Flakk Wagon at GamesDay 2008, it wasn’t until July 2009 that we saw the first actual Forge World variant Ork Trukk kit, the Ork Half Trakk.

This has a considerable amount of resin for the tracks, new front wheels and a new engine.

I had very little warpage with this model, but I did have a shrinkage probem with the tracks, which I fixed with plastic rod.

The chassis was then given a black undercoat using spray paint. I then drybrushed the whole chassis with Tin Bitz. The flatbed was sprayed with a Humbrol brown paint. I then gave it a wash of Devlan Mud. I added some more washes to the body of the Half Trakk using Devlan Brown and Badab Black.

The engine needs work and the whole thing also needs more weathering.

Then there is the main weapon and the krew.

Ork Halftrakk on the workbench.

 

 

Forgeworld Ork Aircraft Traktor

The Ork Aircraft Traktor is used to taxi Ork aircraft in position to launch, where it takes off discarding the launch trolley. the Aircraft Traktor also recovers landed Ork aircraft for refueling.

One of the gifts I got for a birthday many years ago was the Forgeworld Ork Aircraft Traktor and Launch Trolley.

One of the reasons I asked for it was not just because I have an Ork Fighter Bommer on the workbench but also as on the Forgeworld website it said: Be warned, stock of this model is starting to run low!

Then they stopped selling it.

The model consists of the plastic Wartrakk and some resin pieces.

I have nearly finished painting it, so decided it was time I did finish painting it.

I gave the model a black undercoat. I followed this with a drybrush of Tin Bitz. I then gave the model a heavy drybrush of Boltgun Metal. I then added a lot of rust using Chestnut Ink mixed with some Blazing Orange to remove the gloss from the ink.

I touched up the motorcycle fuel tank with some white paint.

This is quite a rare model.

Launcha for the Grot Bomb Launcha

The Forgeworld Grot Bomb Launcha is probably one of my all time favourite models.  I have three of these, one is finished, the other two are a work in progress.

I found the chassis of one in of the boxes with my Land Raiders. Having painted the chassis with a spray of Citadel Zandri Dust. I painted the exhausts and the rear deck with Leadbelcher. I then gave the model a wash using Citadel Shade Agrax Earthshade. I drybrushed the model. I gave the tracks a heavy drybrush of Gorthor Brown, followed by a lighter drybrush of Leadbelcher.

The launcher system (launcha) was already painted black and drybrushed with a metallic paint. Though I think this one was from my other Grot Bomb Launcha.

I touched up the white paint on the Grot Bomb pilot to later paint with green flesh tones.

I also need to paint the driver. Well I also need to find the driver as well.

Still some work to do.

See the workbench feature on the Grot Bomb Launcha.

Found the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece.

Well I was pleased to find the missing parts and these have now been reunited with the Land Raider.

Forge World MkIIB Land Raider

Still got to decide what colour I will be painting the model.

See the full Mark IIb Land Raider workbench.