forge world Archives - Page 36 of 101

Undercoating the Mega Dread

So after getting all the parts together the next stage was undercoating the model.

See the full workbench feature on my Ork Mega Dread.

Ork Big Trakk with Supa Kannon

This Ork Big Trakk with Supa Kannon was part of the Ork Shanty Town display at GamesDay 2010.

I have been making my own Big Trakk and it’s a nice if somewhat complicated kit to put together. I am not going to arm it though with the Supa Kannon and will probably use a “normal” Kannon. According to Tony Cottrell at the Forge World seminar at GamesDay 2010, it would appear that Forge World have “finished” with the Orks for a while and will be doing lots of other stuff before they return to the Orks (it at all).

Of course what we still have to see from either Forge World or Games Workshop is a new buggy or wartrakk. There are images in the Forge World Imperial Armour book of a new design of a buggy, but so far no real concrete evidence that any new model is going to be released.

Ork Trukk with Big Zzappa

Having fixed most of my Ork Trukk with Enclosed Cab together, I decided to have a look to see how the Big Zzappa looked inside the flatbed.

Works well and as would be expected fits in very nicely.

See the workbench features on the Ork Trukk with Enclosed Cab and the Big Zzappa.

Adding the Big Trakk Tracks

The next stage was adding the tracks. These have been numbered on the sprues and this is the order around the wheels that they go.

The largest pieces of track I had were quite warped, but immersing them in hot water allowed me to get them nice and flat. The key I found in placing the track was to get the largest piece flat attached to the rear cog.

I managed to get the right side track to fit. It was quite a struggle to get the bits underneath the rear flatbed in, but it all came together in the end.

And now the left…

The workbench feature on the Big Trakk may help anyone else putting one of these kits together.

Gallery of photographs of the Big Trakk.

Fitting the Big Trakk Exhausts

The next stage for my Big Ork Trakk was to add the exhausts. There are two exhausts and it is not immediately apparent where they fit.

They are fitted on either side of the driver’s seat facing out at an angle.

Fitting the right exhaust, with the exhaust highlighted.

Fitting the left exhaust, with the exhaust highlighted.

The workbench feature on the Big Trakk may help anyone else putting one of these kits together.

Gallery of photographs of the Big Trakk.

Forge World Ork Trukk with Enclosed Cab

Having taken the parts our of the bag and washed the resin pieces of the Forge World Ork Trukk with Enclosed Cab the next stage was to start putting it together.

The resin cab is basically one piece to which the smaller parts fit very easily.

I decided to construct the flatbed with the sides up.

The chassis was constructed as per the instructions, though like my other Trukk as I had spare wheels I gave the model all rounded wheels rather than the mix that comes as standard with the kit.

Another view.

I do really like how different this kit (and the wheels) this makes the Ork Trukk look. As a result I won’t have a consistent style of Ork Trukk, just a ramshackle series of vehicles that may have a common heritage, but look all cobbled together from whatever was lying about in the Mek’s workshop.

See the full workbench feature on the Forge World Ork Trukk with Enclosed Cab.

Ork Big Trakk Wheels

The next stage for my Big Ork Trakk was to add the wheels.

These were attached to the suspension (torsion bars) before they were fixed to the vehicle.

The next stage was to add the driving wheels. Again fix these with the model on a flat surface as this will ensure that the model sits flat on the tracks. I did one wheel at a time to ensure I didn’t knock them as I stuck them together. Also ensure that you have the suspension or torsion bars facing to towards the back of the vehicle.

The other side.

Starting to look a lot more like a Big Trakk now.

The workbench feature on the Big Trakk may help anyone else putting one of these kits together.

Gallery of photographs of the Big Trakk.

Ork Big Trakk, making progress

The next stage for my Big Ork Trakk was to add the front wheels to the axels.

The view from underneath.

It is essential when sticking these that the model fits flat to the table otherwise you may have issues later on fitting the tracks.

Starting to look more like a Big Trakk now.

The workbench feature on the Big Trakk may help anyone else putting one of these kits together.

Gallery of photographs of the Big Trakk.

Forge World Ork Trukk with Enclosed Cab

This model was one of the many new Ork models released by Forge World in 2009.

Designed by Will Hayes and Phil Stutcinskas. (a hybrid resin and plastic model using the Ork Trukk kit). —The model makes for a great alternative for your Trukk fleet as well as an excellent base for your own conversions. Its enclosed cab can also be used to represent the Armour Plates upgrade on a trukk.

This Trukk model also includes a folding platform at the rear. This in my opinion is much better than the plastic platform included with the plastic kit.