workbench Archives - Page 145 of 153

Big Gunz Krew

I have been painting some more krew for my Big Gunz.

With only the two crew supplied, an opponent can quickly make your Gunz useless by killing them. By adding extra crew the Gunz last longer and thus do more damage.

Shoota Boyz

I have been adding to my Ork Boyz.

Using the same technique as outlined on my website.

It is relatively quick and quite a few boyz can be painted in a short time.

Feral Ork Standard Bearer

This is the progress I have made with my Ork Standard Bearer.

As with most of my Feral Orks he uses components from the WHFB Orc sprue.

As for the eventual banner design it has to be this…

Skorcha

As you can see from the photo:

I have painted various components of the Skorcha and some of the driver.

The main body will be a brown/orange colour with the metal parts in a dirty rusty metal colour.

I have also virtually finished the Grot who sits on the trailer.

Feral Ork

Here is one of my Feral Orks.

As you can see it is about halfway through its paintjob.

Feral Ork Conversions

Here are a couple of Feral Orks, using fantasy and WH40K sprues.

They use components from the Ork Boyz sprue and the Warhammer Fantasy Battle Orc sprue.

This gives them a low-tech look.

Tankbustas

I already have the metal models and they are painted and finished.

Using components from the Stormboyz metal bitz I am converting some plastic Ork models into Tankbustas.

The middle model has an Orc Warrior shield arm, which I have drilled a hole through the fist. I then cut one of the Stormboyz grenades in half before putting the two halves through the hole and sticking them with superglue.

I start off with a black undercoat and then do all the metallic bitz with a drybrush of tin bitz and chainmail.

This unit will also have an Ork with a converted Rokkit Launcha.

Stormboyz

I have finished sticking my Ork Stormboyz together.

The models which come as a multi-part plastic and metal kit have also had components from the Orc Warriors Warhammer sprue used.

They have now being undercoated black. Their jump packs have been undercoated white and I am painting them separately (hence they are glued to a strip of thick plasticard as shown here before being undercoated).

I am intending to paint the jump packs in reds and yellows.

The jump packs in my mind would make excellent large rockets for Epic Armageddon, however at £2 each they are quite expensive, if you wanted a large number it would be cheaper to buy the Stormboyz boxed set!

Ork with Rokkit Launcha

This is a conversion I have done of an Ork with Rokkit Launcha.

It is a plastic Ork Boyz model, then using a Shoota and sticking a metal grenade (from the Stormboyz set) in the end, making it look very much like a panzerfaust. The head is also from the Stormboyz set.