Iconography on the Inquisitorial Repressor

The Repressor tank is often used by Sisters of Battle as transport, and by the Adeptus Arbites in an anti insurgency role. I said  in a blog post back in 2004.

“I do like this model and I am intending to get one to use with my Daemonhunters army as a transport for the Storm Troopers”.

I did get one that Christmas as a present. Though I actually started building and painting this model back in 2007, I recently retrieved it from storage and decided that I would try and finish painting it. I realised I had made quite significant progress and it wouldn’t take too long to finish it off.

Having sprayed the model with Citadel Zandri Dust. I started the detailing, using Leadbelcher on the weapons and the exhausts. The next step was painting the iconography and purity seals.

I decided that I would go down the full inquisitorial look for the iconography, as opposed to doing stone or bronze on some of my other vehicles.

For the skull I used Ushabti Bone. Once shaded this will then be highlighted with more Ushabti Bone and then White Scar for the highlights.

I painted the inner part of the Inquisition symbol with Mephiston Red. The outer part was done with Retributor Armour. I was pleased with how this went and how it looks.

I painted the purity seals using Ushabti Bone for the paper and for the wax seals I used Mephiston Red.

For the eagle and Inquisitorial symbol on the back ramp I used Retributor Armour.

The next step will be shading the model.

Iconography on the Razorback

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I started this model back then, then out it in storage. I recently retrieved it from said storage and decided that I would try and finish painting it. I was using Tausept Ochre as the base coat, however having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would paint the Razorback in the same scheme.

Having sprayed the underneath of the model with Citadel Zandri Dust. I gave the model a basecoat of Army Painter Daemonic Yellow. This was followed with Leadbelcher for painting the exhausts and weaponry.

The next step was painting the iconography and purity seals. Purity seals were Ushabti Bone for the paper and Mephiston Red for the red wax.

For the brass etchings, I did consider painting these up, but in the end I painted them with a base coat of Warplock Bronze.

I had intended to use Sycorax Bronze, however my post of this was a little dried up… so I had to throw it away.

I did try out a wash on the main weaponry to see the effect it would have on the bronze painted iconography.

I also painted the door panels with Warplock Bronze.

This is the front of the Razorback.

I painted the front icon with Mechanicus Standard Grey aiming for a stone effect, after shading and drybrushing.

See the full workbench of the Razorback.

Looking again at my Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while.

After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat.

Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I sprayed the arms separately.

I then attached the weapon arms.

Next stages will be washing and highlighting.

See the full workbench feature on my Grey Knights Dreadnought.

Found the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece.

Well I was pleased to find the missing parts and these have now been reunited with the Land Raider.

Forge World MkIIB Land Raider

Still got to decide what colour I will be painting the model.

See the full Mark IIb Land Raider workbench.

Tallarn Imperial Guard

As well as my other Daemonhunters Inquisitorial Stormtroopers which are based on the Cadian Kasrkin I have also decided to add a unit based on the Tallarn or I may just use them as inducted Imperial Guard. I have had these models for a fair while.

I did look at my original painting scheme that I was using for the blister pack of Tallarn Imperial Guard. I had used a basecoat of Desert Yellow followed by a wash consisting of Chestnut Ink and Scorched Brown paint.

However I did think about doing something slightly different now that Contrast paints were available. I had painted some Star Wars Legion Rebel Troopers with Citadel Snakebite Leather Contrast paint and had been impressed with the results.

I painted the models with Snakebite Leather Contrast paint, after giving them another spray with Citadel Corax White to improve the effect of the contrast paint.

The next step was a drybrush. The other Tallarn models I painted I had  drybushed the three models with Snakebite Leather and Bleached Bone. Neither of these paints were available any more. So using this chart I used Layer Balor Brown instead of Snakebite Leather and used Layer Ushabti Bone instead of Bleached Bone.

Here are three troopers.

Here are the commanders (or sergeants) for the platoon.

Here are three more of the troopers.

Unlike highlighting and glazes and the suchlike, drybrushing does not give as neat as a finish as those methods. However I quite like the dusty look for these desert based models and these are going to be gaming models, not Golden Demon entries!

See the workbench journey for this Tallarn Imperial Guard boxed set and the workbench feature on the Tallarn Imperial Guard blister.

Tallarn Missile Launcher Team

As well as my other Daemonhunters Inquisitorial Stormtroopers which are based on the Cadian Kasrkin I have also decided to add a unit based on the Tallarn or I may just use them as inducted Imperial Guard. I have had these models for a fair while.

I did look at my original painting scheme that I was using for the blister pack of Tallarn Imperial Guard. I had used a basecoat of Desert Yellow followed by a wash consisting of Chestnut Ink and Scorched Brown paint.

However I did think about doing something slightly different now that Contrast paints were available. I had painted some Star Wars Legion Rebel Troopers with Citadel Snakebite Leather Contrast paint and had been impressed with the results.

I painted the models with Snakebite Leather Contrast paint, after giving them another spray with Citadel Corax White to improve the effect of the contrast paint.

The next step was a drybrush. The other Tallarn models I painted I had  drybushed the three models with Snakebite Leather and Bleached Bone. Neither of these paints were available any more. So using this chart I used Layer Balor Brown instead of Snakebite Leather and used Layer Ushabti Bone instead of Bleached Bone.

These are the two crew for the missile launcher team.

Unlike highlighting and glazes and the suchlike, drybrushing does not give as neat as a finish as those methods. However I quite like the dusty look for these desert based models and these are going to be gaming models, not Golden Demon entries!

See the workbench journey for this Tallarn Imperial Guard boxed set and the workbench feature on the Tallarn Imperial Guard blister.

Making progress on the Repressor

The Repressor tank is often used by Sisters of Battle as transport, and by the Adeptus Arbites in an anti insurgency role. I said  in a blog post back in 2004.

“I do like this model and I am intending to get one to use with my Daemonhunters army as a transport for the Storm Troopers”.

I did get one that Christmas as a present. Though I actually started building and painting this model back in 2007, I recently retrieved it from storage and decided that I would try and finish painting it. I realised I had made quite significant progress.

Having sprayed the model with Citadel Zandri Dust. I started the detailing, using Leadbelcher on the weapons and the exhausts. The next step was painting the iconography and purity seals.

Here is the Repressor with the dozer blade and turret.

I had used shades on the blade and the turret. I still have some work to do on the iconography before I shade the rest of the vehicle.

Land Raider Iconography

I have on my workbench a standard Land Raider. For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I also painted the weapon sub-assemblies.

I started detailing and painting the iconography.

For the skull and the paper on the purity seals I used Ushabti Bone. For the wax seals I used Mephiston Red.

Purity Seals on the Repressor

The Repressor tank is often used by Sisters of Battle as transport, and by the Adeptus Arbites in an anti insurgency role. I said  in a blog post back in 2004.

“I do like this model and I am intending to get one to use with my Daemonhunters army as a transport for the Storm Troopers”.

I did get one that Christmas as a present. Though I actually started building and painting this model back in 2007, I recently retrieved it from storage and decided that I would try and finish painting it. I realised I had made quite significant progress.

Having sprayed the model with Citadel Zandri Dust. I started the detailing, using Leadbelcher on the weapons and the exhausts. The next step was painting the iconography and purity seals. For the skull I used Ushabti Bone.

I painted the purity seals using Ushabti Bone for the paper and for the wax seals I used Mephiston Red.

Painting tracks

Having started repainting my Land Raider, a MkIIb Land Raider, the Razorback and the Repressor, I decided to paint the tracks. Having liked what I did with the Deimos-pattern Rhino tracks, I went with the same process.

I had done a few different things with the different tracks, but most had a black undercoat.

I gave the Land Raider tracks a spray of Mechanicus Standard Grey.

I did the same for the Rhino tracks.

The tracks for the Deimos-pattern Rhino are much better than the tracks you get with the Rhino kit.

The next step will be a heavy drybrush of Gorthor Brown, then a wash of Agrax Earthshade Shade. The tracks will be finished off with a light drybrush, first with Leadbelcher, then Terminatus Stone.