warhammer the horus heresy Archives - Page 13 of 23

Typhon Heavy Siege Tank in the desert

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank. Here is the virtually finished model in the desert.

I still need to add some transfers, and then I will do some further weathering.

I plan to use some weathering powders I got from Forge World many years ago.

I am not too happy with the engine area, so might look at that part of the model again.

The whole process started with constructing the model, I then finished putting it together. The next stage was a white undercoat. I then gave the model a partial base coat of Army Painter Desert Yellow. I then gave the model a base coat of Army Painter Daemonic Yellow. I painted the bolter and the exhausts using Citadel Leadbelcher. It was then onto shading the model and then shading it some more. I also painted the tracks. The Typhon was then drybrushed. I glued in the Dreadhammer Siege Cannon and added the frontal armour and after painting the sponson weapons, these were added to the Typhon, as were the tracks.

See the workbench feature on the Typhon Heavy Siege Tank.

Deimos Pattern Rhino in the desert

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

This is my Deimos Pattern Rhino in the desert.

Rhino getting in the way of the Typhon Heavy Siege Tank.

My other Deimos Pattern Rhino (note the two cupola bolters).

See the workbench feature on the first Deimos Pattern Rhino.

See the workbench feature on the second Deimos Pattern Rhino.

Tracking the Typhon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

The Typhon Heavy Siege Tank was released as a plastic kit for The Horus Heresy. I’ve always liked the Forge World resin model and so was pleased to get one of the new plastic kits for my Imperial Fists force.

Having started constructing the model, I finished putting it together. The next stage was a white undercoat. I then gave the model a partial base coat of Army Painter Desert Yellow. I then gave the model a base coat of Army Painter Daemonic Yellow. I painted the bolter and the exhausts using Citadel Leadbelcher. It was then onto shading the model and then shading it some more. I also painted the tracks. The Typhon was then drybrushed. I glued in the Dreadhammer Siege Cannon and added the frontal armour and after painting the sponson weapons, these were added to the Typhon.

The next stage was to add the tracks to the Typhon. I had painted the tracks on the sprue. These were removed from the sprue and using superglue I attached the tracks to the Typhon.

Unlike the Rhino tracks, the tracks for the left and right hand sides are identical. As the Typhon is longer than the Proteus Land Raider, there are four extra track sections that need to be added.

There were a couple of places where I found it challenging to affix them.

I am not too happy with the engine area, so might look at that part of the model again.

See the workbench feature on the Typhon Heavy Siege Tank.

Typhon Heavy Siege Tank Sponsons

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

I had undercoated the sponson weapons and then painted the armour with Army Painter Desert Yellow. I then painted the lascannons with Citadel Leadbelcher. The sensor covering was then painted with Citadel Layer Flash Gitz Yellow.

These were then attached to the Typhon.

It was then onto shading the sponsons. I used some Citadel Reikland Fleshshade Shade on them.

The next stage will be affixing the tracks.

See the workbench feature on the Typhon Heavy Siege Tank.

Land Raider in the desert

Here is my Grey Knights Land Raider in the desert.

Originally planned to be a Grey Knights Land Raider, despite the iconography, I decided I would paint it as an Imperial Fists Land Raider

I used the same paint scheme I had used on my Deimos Pattern Rhino. Originally for the basecoat I used Tausept Ochre. After retreiving the model from storage, the first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I painted the weapon sub-assemblies. added detailing and painted the iconography. Then using various Citadel shades I washed and shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. The tracks for the Land Raider were painted, and the iconography was completed with washes and highlights. The finished tracks were then glued to the Land Raider with superglue.

See the full workbench feature on the Land Raider.

Deimos Pattern Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems.

Having finished painting the Predator, I photographed the model on my desert terrain board.

Another view.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Razorback in the desert

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I recently retrieved it from storage and decided that I would try and finish painting it.

I took some photographs of the Razorback on my desert scenery tile.

There is still some work to do with this model, but I am pleased I have made progress and nearly finished it.

I like how the Inquisitorial iconography has turned out on the model.

It’s a pity that, that range has been retired. I found some more resin purity seals and a spare Rhino frontal armour plate in one of my bits box.

See the workbench feature on the Razorback.

Adding the Dreadhammer Siege Cannon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

I glued in the Dreadhammer Siege Cannon and then added the frontal armour.

See the workbench feature on the Typhon Heavy Siege Tank.

Deimos Pattern Rhino

I was pleased to see one of the new Horus Heresy releases announced at Warhammer Fest was the Plastic Deimos Pattern Rhino. So when it was available for pre-order I clicked through and ordered the kit from my local FLGS.

Having finished painting them, I photographed them on my desert terrain board.

I was lucky enough to get a second Rhino for a Christmas present. This I painted in the same way as the first Rhino.

See the workbench feature on the first Deimos Pattern Rhino.

See the workbench feature on the second Deimos Pattern Rhino.

Drybrushing the Typhon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a stippling process added paint to the model. I then used the same process with Citadel Layer Flash Gitz Yellow.

I then gave the model a light drybrush of Citadel Layer Dorn Yellow.

See the workbench feature on the Typhon Heavy Siege Tank.