scorpion Archives - Page 2 of 2 - Felix's Gaming Pages

Heavier

One of the things I dislike about the new plastic 15mm kits from Battlefront is the lack of weight the models have compared to older metal kits and even the resin ones have.

With my recent addition of Team Yankee British Scorpion and Scimitar tanks I started to think about I could make them heavier.

My initial choice was some lead (or lead-free) weights of some kind, there isn’t much space in the models so any extra weight would need to be quite dense (so heavy weight but not very big). The obvious choice was fishing weights, but I couldn’t find any that were small enough for the models.

Another idea was some lead sheet, again small, but heavy.

In the end I compromised and went with Weldtite 5/32-inch British Made Case Hardened Bearings – 750 Pieces which I ordered from Amazon.

These are very small and just under 4mm in diameter.

I glued them into the hulls of the light tanks with some super glue before checking there were no loose bearings. I then glued the hull together.

They are not really heavy, but certainly better than they were and I fell less likely to be blown over by a strong breath in a game of Team Yankee.

So do you add weights to your plastic tanks and if you do, what method do you use?

15mm British Combat Vehicle Reconnaissance (Tracked) – Team Yankee

For Christmas I was kindly given not only the Team Yankee Iron Maiden book I also got a box of the newly released 15mm British Scorpion or Scimitar Troop.

The British Army Of the Rhine had three tracked reconnaissance regiments. The recce troops of the first two were equipped entirely with Scimitar reconnaissance vehicles, while the recce troops of the third mixed Scimitars and Scorpions together.

FV107 Scimitar

The FV101 Scorpion is a British armoured reconnaissance vehicle. It was the lead vehicle and the fire support type in the Combat Vehicle Reconnaissance (Tracked), CVR(T), family of seven armoured vehicles. Manufactured by Alvis, it was introduced into service with the British Army in 1973 and served until 1994.

The FV107 Scimitar is a similar armoured reconnaissance vehicle (sometimes classed as a light tank) also used by the British Army. It was manufactured by Alvis in Coventry. It is very similar to the FV101 Scorpion, but mounts a high velocity 30 mm L21 RARDEN cannon instead of a 76 mm gun. It was issued to Royal Armoured Corps armoured regiments in the reconnaissance role.

This is the box art which shows two Scorpions and two Scimitars patrolling (probably) a West German town.

The box contains four sprues and unit cards for use with Team Yankee. Each sprue allows you to build either a Scorpion or a Scimitar.

Starting to build them they go together really nicely.

More soon…

The British are coming…

…in the meantime let’s take a look at the Germans.

One thing that I thought that Battlefront would do when they released the Germans for Team Yankee was that they would do a minimal release and was pleasantly surprised by the range of models they did in fact bring out.

With the initial releases for the US (and Soviet) I was slightly disappointed with the limited number of models that we got. Though we had the M1 Abrams, we didn’t get the M60A3 MBT.

It felt like a really limited release, so when I saw that Battlefront were going to release German and British forces my expectation was that we would get a limited number of vehicles. So to get thirteen sets for the Germans compared to the seven for the US was really refreshing.

I did like the Raketenwerfer model, something very different.

I also was pleased to see the Marder too.

I think it would be nice to have seen the Kanonenjagdpanzer, but you can’t have everything.

As a result I have higher expectations for the future British releases. I am hoping to see the following models release for the BAOR forces.

I would like to see both the Chieftain and Challenger 1 main battle tanks, but if the American releases are anything to go by then we might only get one tank and I suspect that will be the Challenger.

I think we might also see the light tanks or armoured reconnisance vehicles the FV101 Scorpion and FV107 Scimiatar. They are very similar vehicles I can see how we could have both. The Scorpion and the Scimiatar were part of the Combat Vehicle Reconnaissance (Tracked) family. As they shared common automotive components and suspension I can see how easy it would be, if we get the Scorpion we could also get other members of the CVR(T) family such as the Spartan armoured personnel carrier (APC).

As well as the Sultan command and control vehicle, Samaritan armoured ambulance, Striker anti–tank guided missile vehicle and possibly even the Samson armoured recovery vehicle.

The main British APC in 1985 was the FV432 APC so I suspect that may be a likely contender for a model. 1985 is a bit early for the Warrior IFV that entered service in 1987.

In terms of artillery, though the British will probably get the M109 it would be interesting to see if we get the FV433 Abbot SPG. If we get the FV432 then we may get the FV438 Swingfire variant (as well as other FV430 series variants).

We already have the German Tornado, so no surprise if we have an RAF version.

I would also like to see, but don’t expect to see various British armoured cars such as the Humber Pig, the Ferret armoured car or even the Alvis Saladin Armoured Car.

So what do you think we will see for the Team Yankee releases for the British?

Image credits: Wikipedia and Battlefront

Eldar Scorpion Type II

The Scorpion super heavy grav tank is one of the largest vehicles capable of anti-gravatic movement. The Eldar have used the Scorpion to spearhead an all out attack, especially against strongly defended positions where its Pulsars are used to engage enemy bunkers and strong points.

This is the model from the Forgeworld displays at GamesDay 2004.

Eldar Scorpion Type II