Going grey with the Adeptus Astartes Flyers

As with my Asuryani Flyers the next stage after giving the Adeptus Astartes models for Aeronautica Imperialis a white undercoat was to think about the colour scheme. I have the models from the Wrath of Angels and I now have a Thunderhawk as well. I did think about Ultramarines blue, then Salamanders green, but in the end decided on painting them up as Grey Knights. Forge World had a display of a Grey Knights Thunderhawk at a GamesDay event which is what inspired me.

Grey Knights Thunderhawk
Grey Knights Thunderhawk

I think this could work, however they used a grey colour scheme rather than the metallic finish of the Grey Knights themselves.

So I gave the Storm Eagles a basecoat of Basilicanum Grey contrast paint.

I did the same with the Xiphon Interceptors.

The next stage will be that heavy dry brush and then a lighter dry brush to draw out the highlights and make the models look more like the Forge World Grey Knights.

After that it will be detailing the hull (with red), the engines and weapons.

Going green with the Asuryani Flyers

These are the Asuryani Flyers (though I think of them as Eldar Flyers) that came with the Wrath of Angels boxed game.

You get three Nightwing fighters, in the Wrath of Angels boxed game, you also get three Phoenix Bombers.

So the next stage after giving the Asuryani Flyers for Aeronautica Imperialis a white undercoat was to think about the colour scheme.

My Ork flyers are red and yellow, so decided I wanted something different to that. My Imperial Navy flyers are dark blue, and again I wanted to avoid duplication. So what was left on the colour wheel was potentially green.

I did quite like this Eldar colour scheme from the GW displays at Warhammer World and Games Day.

Eldar Falcon
Falcon Grav Tank

And this one.

Falcon Grav Tank
Falcon Grav Tank

So that was that really, I was going green.

It did what I wanted on the model in the sense of adding shadow to the panel lines.

This wasn’t as effective has I hoped with some pooling in places on the flat wings.

I think with a heavy dry brush I can retain the shadows and remove some of the effects of the pooling.

The next stage will be that heavy dry brush and then a lighter dry brush to draw out the highlights.

After that it will be detailing the engines and weapons.

Sorting my paints out!

Having some time over the weekend I decided it was time to sort out my collection of paints, washes and inks.

Painting more models now, meant that I have been going out to my local games shop to buy new paints. I realise that I must check what I have before buying paints, I now have three full pots of Ushabti Bone as well as two pots of Death World Forest. I wanted these colours, but didn’t realise I already had some in my collection.

I knew I had a few boxes of paints on my workbench, sorted a little by age, but there were various other paints across the workbench and a few hanging around with some sprue and stuff. I also had some paints that I had picked up from copies of Warhammer Conquest as well. I went through them and sorted them by make and colour. Sadly there were way too many I had to throw out due to age and being completely dried out. My painting history in many ways is defined by my paint purchasing history.

Like many (older) gamers I started painting my early Warhammer models with small tins of Humbrol enamel. My painting was very much followed my painting of Airfix and Matchbox model kits. Single colours, no shading or highlighting.

I do remember on a visit to the first Games Workshop shop in Hammersmith and looking at the models there on display marvelling at the amazing paintwork the painter had achieved, also having no real idea about how to even some close to that.

The Citadel released their acrylic Citadel Colour paints back in 1985. There were two set and individual colours. I remember buying Set 1 which included classic colour such as Skull White, Chaos Black as well as the never covered anything Sunburst Yellow. I do remember really liking the Enchanted Blue and using that a lot on some models. The boxed set cost £4.95 with individual paints at 60p each!

I used these paints a lot over that time to paint models. Some were difficult to use over black undercoats, so much so that often I would paint over the undercoat with white paint to ensure the colour would cover the part of the model I was painting.

My painting technique also started to evolve as well, though I did enter the first Golden Demon Award, I never stood a chance of winning!

I started initially using a black undercoat, and in some cases then just drybrushing the models. No basecoats, no layers, just drybrushing! This really didn’t work very well and so moved onto base coat and highlighting with some dry brushing on those kinds of things that work well with drybrushing, such as fur and wood.

Though I did start to use some blended and highlighting techniques and some of my models I was quite pleased with from that time.

I did start to use a fair few Tamiya Acrylic paints, in the main for bases. Their more naturalistic subdued and military colours made for better colours for bases I thought. Their Flat Green was so much nicer I thought than the Goblin Green that you would see on GW models.

Another paint I used a bit at this time was the Humbrol Acrylic range. Very small pots in comparison to Citadel and Tamiya, but they did have one drawback, the lids soon became very ill-fitting due to dried paint, so they would dry out so much faster than other paints in my collection.

One dramatic change to my painting technique was the release of the Citadel Inks. The Chestnut ink was a staple of my workbench for many years, though I didn’t like the glossy effect you got with the inks. 

It was a revelation when I realised, that by adding some ordinary paint to my ink wash, it would remove most if not all of the glossiness. That  changed how I would paint my models.

So when the inks were places with washes, Devlan Mud and Gryphonne Sepia were used extensively.

Another Citadel paint I liked a lot were the Foundation paints. Tausept Ochre became my most popular colour and too many of my models were painted this light sandy brown. I loved how they easily covered a black undercoat. The new Base paints are not as good.

When I got into Flames of War I knew I would need some other kinds of paint to paint the tanks and infantry, so I made quite a substantial purchase of their paints to paint my tanks.

This introduced me to the Vallejo range of paints. Being able to buy these from  a local model shop, made painting much easier, though I was finding it difficult to find the time to paint.

Having made the decision to paint some of my old 40K models, I checked over my blog how I had painted some of the models. The big challenge was that much of the Citadel paint range that I had used back then was now no longer available after Games Workshop changed the complete paint range.

Luckily there was a few places on the web to find out which old paints were replaced by which new ones.

Deciding to paint some models with BoltGun Metal and discovering that wasn’t available, and my last pot had dried up I placed an online order for its replacement, Leadbelcher.

Having sent off for some of this paint, I also included the Ork Flesh Contrast Paint in my order, as I was interested to see how these would work for my Orks. In a test I decided to paint the Krew of my Forge World Ork heavy weapons with the contrast paint.

I have to say I was quite impressed with the results on only a single coat. So much so I bought some of the others in the range to use on different models.

I know I have been painting quite a big as I am now on my third pot of Seraphim Sepia since the beginning of June! I am a fan of the shades, as they allow me to create effective paint schemes without too much effort!

I am never going to be a Golden Demon painter, I don’t have the patience, nor the eyesight, let alone the time to paint something to that standard. What I am trying to do now is paint the models so they are completed to a good level (for me) and they look good on the table.