workbench Archives - Page 11 of 153

Painting the base of the Forge World Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while. After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat. Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I gave the model a wash of Nuln Oil Shade. For the next stage I used some Citadel Leadbelcher. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did a lighter drybrush of various silver paints.

I did intend to paint the base for the model next, but upon checking the workbench feature for my Grey Knights, I realised that I needed a paint I didn’t have. For my Grey Knights I painted the flocked (well sanded) bases with Bestial Brown and then drybrushed with Bleached Bone. I bought a pot of Mournfang Brown. I used this to paint the base of the Dreadnought.

I didn’t have any Bleached Bone either. I drybrushed the base with Citadel Ushabti Bone, which is a replacement for Bleached Bone.

See the workbench feature on the Grey Knights Dreadnought.

Basing the Inquisitorial Stormtroopers – Tallarn

I have some Daemonhunters Inquisitorial Stormtroopers which are based on the Cadian Kasrkin I decided many years ago to add a unit based on the Tallarn.

I had done some more work on them, but never got around to photographing them for the blog or website. As a result I had forgotten how much progress I had made with them. I painted their bases.

I drybrushed the bases with Citadel Ushabti Bone, which is a replacement for Bleached Bone.

Check out the workbench feature on the Inquisitorial Stormtroopers (Tallarn Blister).

Shading the Typhon more

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

The Typhon Heavy Siege Tank was released as a plastic kit for The Horus Heresy. I’ve always liked the Forge World resin model and so was pleased to get one of the new plastic kits for my Imperial Fists force.

Having started constructing the model, I finished putting it together. The next stage was a white undercoat. I then gave the model a partial base coat of Army Painter Desert Yellow. I then gave the model a base coat of Army Painter Daemonic Yellow. I painted the bolter and the exhausts using Citadel Leadbelcher. It was then onto shading the model.

I did some more shading using Citadel Reikland Fleshshade Shade and Citadel Seraphim Sepia Shade and Citadel Nuln Oil Shade on the exhausts.

I used Citadel Seraphim Sepia Shade on the main weapon.

Once that shade was dry, I used Citadel Nuln Oil Shade on the engine vents and the exhausts.

I then used Citadel Nuln Oil Shade on the wheels as well.

I also used Citadel Agrax Earthshade Shade on the tracks, forgetting that I should have done a heavy drybrush of Gorthor Brown first.

I will need to do that, and then use Citadel Agrax Earthshade Shade on the tracks.

See the workbench feature on the Typhon Heavy Siege Tank.

Tracking the Deimos Predator

The Predator is perhaps the best known and most widespread variant of the basic Rhino chassis. Augmented with superior armour and firepower, it entirely sacrifices the Rhino’s troop transport capacity in favour of ammunition and generators for its formidable weapon systems.

Having got this kit for Christmas, I started putting the model together. For painting I kept the sponsons separate and I can easily remove the turret as well. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I painted the main weapon, and the exhausts, with Leadbelcher. It was then onto shading the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did some more drybrushing some lighter yellow paints.

The next stage was to affix the tracks to the Predator.

With the tracks for the Predator I gave them a spray of Mechanicus Standard Grey, this was followed by a heavy drybrush of Gorthor Brown. The tracks, once dry, had a wash of Agrax Earthshade Shade. After painting and shading them, I drybrushed them lightly, first with Leadbelcher. I then did a very light drybrush with Terminatus Stone.

The tracks were removed from the sprue and using superglue they were attached to the Predator.

You have to be careful when attaching these, as they are specific to each side of the Predator, but they do attach to the Predator quite easily.

See the workbench feature on the Deimos Pattern Predator Battle Tank.

Painting the barricades

I had been thinking about getting the Mekyboy Workshop kit for a while. So on a shopping trip to my local games shop I decided to make an impulse purchase and buy the box. Well it was nearly 30% cheaper than on the GW site.

Having cleaned the plastic parts I gave them a Corax White undercoat. I then started painting the basecoat across the scrap piles and barricades using a combination of Base and Contrast Citadel paints. I continued to paint the different barricades, using, as before, Base and Contrast paints.

I used some Citadel Cygor Brown Contrast paint on the barricades.

I think it may have been a little too dark for the effect I was trying to achieve.

I think I might do some drybrushing with Gorthor Brown to brighten it up a bit.

More on the various parts from the boxed set.

Tracking the Deimos Rhino

The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels.

I bought the plastic Deimos Pattern Rhino when it came out in the summer, you can see the workbench for that Rhino here. I was lucky enough to get a second Rhino for a Christmas present. The model has many more parts and is a more detailed kit than the original plastic Rhino kit that came out in the 1980s. I constructed the model to the instructions, though I left the tracks off to paint separately. I gave the model an undercoat of Citadel White Scar. I gave the model a couple of light coats of Daemonic Yellow. I also painted the bolter and exhausts with Leadbelcher. I then shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did some more drybrushing.

The next stage was to affix the tracks to the Rhino.

With the tracks for the Rhino I gave them a spray of Mechanicus Standard Grey, this was followed by a heavy drybrush of Gorthor Brown. The tracks, once dry, had a wash of Agrax Earthshade Shade. After painting and shading them, I drybrushed them lightly, first with Leadbelcher. I then did a very light drybrush with Terminatus Stone.

The tracks were removed from the sprue and using superglue they were attached to the Rhino.

You have to be careful when attaching these, as they are specific to each side of the Rhino, but they do attach to the Rhino quite easily.

See the workbench feature on the Deimos Pattern Rhino II.

Shading the scrap some more

I then did some additional shading using Citadel Nuln Oil Shade.

See the workbench feature on Pile of Scrap 3.

Shading the Typhon

My latest model for my Imperial Fists Horus Heresy force is the Typhon Heavy Siege Tank.

It was then onto shading the model. I used some Citadel Reikland Fleshshade Shade, aiming to achieve the same result I got with my first Deimos Pattern Rhino.

This time though, compared to some of my other models I went with an initial lighter shade, with the intention to add more later.

I gave the main weapon a wash of Agrax Earthshade Shade.

I also shaded the gun shield with Citadel Reikland Fleshshade Shade.

The next step will be some more shading.

See the workbench feature on the Typhon Heavy Siege Tank.

Shading the scrap

I had been thinking about getting this kit for a while. So on a shopping trip to my local games shop I decided to make an impulse purchase and buy the box. Well it was nearly 30% cheaper than on the GW site.

Having finished the base coat on pile of scrap 3, I gave it a wash using Citadel Agrax Earthshade Shade.